CF14JA7M50

Series:	CF
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	7.5 MOhms
Tolerance:	±5%
Power (Watts):	0.25W, 1/4W
Composition:	Carbon Film
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	0/ -1500ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.091" Dia x 0.236" L (2.30mm x 6.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are resistors that are wired through metal or ceramic holes. They are typically used where high reliability and accuracy is required. They typically provide high accuracy, tightly defined resistance, and are designed to withstand mechanical shocks and vibrations.The CF14JA7M50 is a type of through hole resistor that is used for a variety of applications, including instrumentation, power supplies, and medical equipment. It has an operating temperature range of -55°C to +125°C and offers a wide variety of resistance values from 0.01Ω to 200KΩ.The CF14JA7M50 consists of three major components: the resistor body, the resistor lead, and the epoxy encapsulation. The resistor body is composed of a high-temperature durable ceramic material and has a low-temperature coefficient and stable resistance. The resistor leads are made from a durable conductive material, usually copper or silver plated steel, and are designed to provide a secure connection to the PCB board and components. The epoxy encapsulation is composed of epoxy resin that acts as a protective covering from environmental conditions and shocks.The CF14JA7M50\'s working principle is based on the application of Ohm\'s Law. Ohm\'s law states that "the current in a conductor is directly proportional to the voltage applied to it." This means that the current, or amount of electric current flow, through the resistor is directly proportional to the voltage applied to it. The CF14JA7M50 is designed so that the applied voltage and current must equal the predetermined resistance value of the resistor, resulting in predictable results.In addition, the CF14JA7M50 is designed to decrease the effects of noise and vibration. The ceramic body of the resistor is able to absorb noise due to its low dielectric constant. The copper or silver plated leads are also designed to absorb vibration, reducing damage due to mechanical stresses.The CF14JA7M50 is primarily used in a wide variety of applications. In instrumentation, they are used to interface, measure, and control high precision analog signals. They are also used in power supplies and medical equipment for current equalization and for noise management.Overall, the CF14JA7M50 is an ideal choice for applications that require high accuracy and reliability. It is able to withstand high temperatures and shocks, while at the same time reducing the effects of noise and vibration. The CF14JA7M50 is a versatile and reliable solution for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description