CFF14JT15K0

Through Hole Resistors

A through hole resistor is a type of resistor that has leads that can be soldered to the PCB through a hole. The purpose of the resistor is to limit the current through the circuit, which can be controlled by varying the resistance level of the resistor. CFF14JT15K0 is a through hole resistor designed for use in industrial control applications. It has a power rating of 2 Watts at 70°C, a resistance range from 0.01 Ohms to 2 KOhms, and a precision of ±5%.

The working principle of the CFF14JT15K0 through hole resistor is based on Ohm’s Law. The law states that the current passing through a conductor is directly proportional to the potential difference across it, and inversely proportional to its resistance. The CFF14JT15K0 utilizes this law by creating a resistor that has a specific resistance value in order to limit the current passing through it. By varying the resistance of the resistor, the current can be controlled.

The CFF14JT15K0 through hole resistor can be used in many applications, such as circuit protection, current limiting, voltage regulation, and signal conditioning. It can also be used in applications that require isolation, such as motor control, relay control, and LED lighting. The resistor can also be used for power management and converter circuits.

The CFF14JT15K0 through hole resistor can be used in a wide range of operating temperatures, from –40°C to +70°C. Its high power rating and voltage rating make it suitable for industrial applications. It also has a low inductance, which helps to reduce the interference with other components when used in high frequency circuits.

In conclusion, the CFF14JT15K0 is a through hole resistor designed for use in industrial control applications. It utilizes Ohm’s Law to limit the current passing through a circuit, while its high power rating and voltage rating make it suitable for a variety of applications. The resistor is also suitable for use over a wide range of operating temperatures, and its low inductance helps to reduce interference with other components.