CFF14JT33R0

Series:	CFF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	33 Ohms
Tolerance:	±5%
Power (Watts):	0.25W, 1/4W
Composition:	Carbon Film
Features:	Flame Proof, Safety
Temperature Coefficient:	0/ -400ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.091" Dia x 0.236" L (2.30mm x 6.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A through hole resistor is a component of the electrical circuit whose role is to reduce the flow of electricity leaving the power source. It does this by supplying a specific amount of resistance and the overall resistance results in a lower voltage across the resistor and a lower power out of the circuit. The most commonly used type of through hole resistor is the CFF14JT33R0.

CFF14JT33R0 Application Field

The CFF14JT33R0 through hole resistor is commonly used in a wide range of applications, primarily as a voltage divider or current limiting device. Because of its relatively high impedance value, the CFF14JT33R0 through hole resistor can be used in low voltage and current applications, such as automotive systems, telecommunications equipment, computer systems, and even consumer electronics.

CFF14JT33R0 Working Principle

The CFF14JT33R0 through hole resistor works on the principle of a resistor where electric current is passed through a wire containing a carbon or metal oxide resistor. When the resistance is applied in the wire, it results in a reduction in total current flow. This phenomenon is known as Ohm’s law which states that the voltage across a resistor is inversely proportional to its resistance. The CFF14JT33R0 through hole resistor is made of carbon or metal oxide and is designed to have a fixed resistance value.

CFF14JT33R0 Design

The CFF14JT33R0 through hole resistor is designed with a single metal lead, usually a copper alloy, in the center of the resistor. The resistor element is usually a carbon or metal oxide wafer that is connected to two metal end caps. The metal lead passes through the two end caps and is held in place by two metal pins or clips. The pins or clips ensure a secure connection of the resistor element to the metal lead and provide a heat sink for the resistor element.

CFF14JT33R0 Advantages

The CFF14JT33R0 through hole resistor provides several advantages over other types of resistors. Its single lead design allows for simple and quick mounting on printed circuit boards, reduces the risk of short circuit problems, and eliminates the need for complicated circuit wiring. Furthermore, its heat sink design helps to protect the Electrical components that are connected to it and provides a longer lifespan.

CFF14JT33R0 Disadvantages

Despite its advantages, the CFF14JT33R0 through hole resistor also has some disadvantages. Its single lead design prevents the resistor element from being moved, which can limit its usage. Additionally, its heat sink design can make the resistor difficult to mount on some printed circuit boards due to its size.

Conclusion

The CFF14JT33R0 through hole resistor is a widely used component in many areas of application. Its single lead design and heat sink allow for easy mounting on printed circuit boards and improved performance. Despite some design limitations, this type of resistor provides an effective method of reducing voltage and current in electrical circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description