CFR3WSJT-73-11R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors (THR) are an important field of electronic components which are used to provide resistance in a variety of electrical circuits. They are commonly used as voltage dividers or as current limiting devices. The most widely used type of through-hole resistor is the carbon film resistor. The CFR3WSJT-73-11R through-hole resistor is a type of carbon film resistor that is commonly used for low-frequency or high-current applications.

The CFR3WSJT-73-11R is a three-pin, through-hole resistor with a 0.25 watt power rating. It has a very low resistance value, ranging from 0.1 to 50 ohms, with a tolerance of ±5%. The resistor also offers a very low temperature coefficient, with an absolute maximum temperature coefficient of 0.2%. The resistor is designed with a frequency response of up to 1MHz.

The resistor is constructed with two layers of carbon film material, creating two resistive paths that are formed by the resistive material between the two layers. The top layer is usually made of copper, and the bottom layer is usually made of aluminum. The resistor also features a protective coating to protect the resistor from environment damage. This coil is then fitted into a plastic body and a lead system is used to provide electrical connection between the parts.

The CFR3WSJT-73-11R resistor is typically used in applications where a low resistance value is needed and where a high accuracy and temperature stability is required. Typical applications for the resistor include automotive and audio applications, instrumentation control, and medical equipment. The resistor can also be used in broadcasting and telecommunications applications, and also in microwave ovens.

The CFR3WSJT-73-11R through-hole resistor has a working principle which is based on Ohm’s Law, which states that the relationship between current and voltage is proportional with the resistance value. This means that the current through the resistor will be proportional to the applied voltage. As the resistance value is increased, the voltage will require a higher value in order to achieve the same amount of current.

The resistor is also designed to produce a very low amount of noise. This is done by using a specially designed structure which filters out external noise and only passes on the electrical signal. This allows the resistor to be used in environments where low levels of noise are desired. The resistor can also be used in high-dynamic circulation applications.

The CFR3WSJT-73-11R through-hole resistor is an important component which is used to provide resistance in a variety of electrical circuits. It is well suited for low-frequency or high-current applications, and offers a high level of accuracy and temperature stability. It is easy to mount and is highly resistant to environmental damage. The resistor also produces a very low level of noise, making it suitable for use in high-dynamic circulation applications.

The specific data is subject to PDF, and the above content is for reference