CG0402MLA-5.5MG Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (transient voltage suppressors) are components primarily used for protecting sensitive electronics such as microprocessors, programmable logic controllers (PLCs), and other circuits from voltage transients. Different types of TVS components, including Varistors, MOVs, and Silicon Avalanche Diodes (SADs), are available depending on the application. This article will discuss the application field and working principle of CG0402MLA-5.5MG, a Varistor TVS component manufactured by STMicroelectronics.

CG0402MLA-5.5MG is a series of two-terminal metal oxide varistors designed for use as transient voltage suppression devices for protection circuits in portable and home appliances. It is designed to handle transient energy up to 600 watts. The device is rated for a maximum surge current of up to 2.5A (at 8UDC).

The primary application for CG0402MLA-5.5MG is over-voltage protection. The device is designed to prevent permanent damage to sensitive electronic components, as well as to protect against internal rogue current transients. It is especially suitable for protecting unsophisticated circuits and circuits that require miniaturization. The device also allows for the reduction of component size and weight, and reduced PCB layout complexity. It is specifically designed for connecting directly to ground, but can also be used as an air-gap gap voltage protector.

CG0402MLA-5.5MG works on the principle of a voltage dependent resistor, or MOV (Metal Oxide Varistor). When a voltage transient is detected, the MOV will clamp the voltage at the threshold value, only allowing current to flow above this predetermined voltage. When the transient is gone, the device will return to its original state, allowing the circuit to continue operation.

The device has two primary operating parameters: maximum DC voltage (Vdc) and clamping voltage (Vc). Vdc determines the maximum voltage the device can handle without being damaged. Vc is the point at which the device will clamp the voltage. The MOV has an intrinsic dynamic response that allows it to react quickly to fast transients.

These two parameters (Vdc and Vc) can be optimized depending on the application. For example, if the maximum DC voltage is kept low, the device can handle smaller transients. If the clamping voltage is set to a lower value, the device will be more sensitive to transient spikes in voltage. Furthermore, the device is designed to operate within a specific frequency range, allowing protection against both steady-state and large, short-duration transients.

In conclusion, the CG0402MLA-5.5MG Varistor offers good protection against voltage transients and is suitable for many applications. Its two primary parameters, Vdc and Vc, can be optimized for specific applications, making it a highly versatile device. Its small size and low weight make it ideal for applications requiring miniaturization, and it is very easy to use. CG0402MLA-5.5MG is a cost-effective and reliable way to protect sensitive electronic components from voltage transients.

The specific data is subject to PDF, and the above content is for reference