CG2415M6-C2

Test Frequency:	6GHz
Supplier Device Package:	6-Minimold
Package / Case:	6-SMD, Flat Leads
Operating Temperature:	-45°C ~ 85°C
Voltage - Supply:	3V
Impedance:	50 Ohm
Features:	--
IIP3:	60dBm
P1dB:	--
Series:	--
Insertion Loss:	0.45dB
Isolation:	26dB
Frequency Range:	500MHz ~ 6GHz
Circuit:	SPDT
Topology:	--
RF Type:	802.11a/b/g/n/ac
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CG2415M6-C2 Application Field and Working Principle

RF switches are used in virtually every stage of modern electronic applications, from communications to consumer electronics. The CG2415M6-C2 is no exception – it is a type of RF switch specifically designed for high-performance wireless applications. In this article, we’ll take a look at the CG2415M6-C2’s application field and working principle.

Application Field

The CG2415M6-C2 is a multistage RF switch designed for use in LTE, GSM, UMTS, WCDMA and CDMA applications. It is a high-performance, low-power switch with a supply voltage ranging from 1.8V to 3.6V, and consumption of less than 3mA for both TX and RX. The switch consists of three. The differential input stage, multiple cascode transistors with large bandwidth and low noise. The switch can also be used for WiMax and broadcasting applications as well.

Working Principle

The CG2415M6-C2 switch employs a cascode transistor-based switching design. The cascode transistors offer large signal bandwidth, low distortion, and low power consumption in a small footprint. Additionally, the RF switch is designed with a differential input stage to ensure better isolation and protection from noise.In operation, the RF switch is driven by an external control pin. When the control pin is logic high, the RF switch is enabled and the connection is made. When the control pin is logic low, the RF switch is disabled and the RF path is cut off.

Conclusion

The CG2415M6-C2 is a type of RF switch specifically designed for high-performance wireless applications. It is a multi-stage RF switch with a cascode transistor-based design which offers large signal bandwidth, low distortion, and low power consumption. Additionally, the switch has a differential input stage for better noise isolation and protection. It is suitable for applications such as LTE, GSM, UMTS, WCDMA, CDMA, WiMax, and broadcasting.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description