CG32.7L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDT) have been around since the 1920s, and are essential components in electrical distribution networks. Their primary function is to protect the distribution network from transient over-voltages caused by lightning and other external influences. This article will discuss the application field and working principle of CG32.7L, a common GDT.

CG32.7L is mainly used as a surge protection device in AC power distribution networks. It can be used in programs related to overvoltage protection of power lines and electromechanical equipment. As a GDT, CG32.7L absorbs transient overvoltages to protect the distribution network in a limited range of frequencies. CG32.7L also has excellent discharge performance, fast response speed, and low impedance at low frequencies.

The working principle of CG32.7L is based on the phenomenon of electrical breakdown. When a transient overvoltage is present, the voltage across a GDT exceeds the breakdown voltage. This causes a spark to jump across the GDT, which then provides an alternative conducting path for the transient current, thus limiting the overvoltage to the value of the GDT. The spark remains until the current drops below the threshold, at which point the discharge stops and the GDT returns to its normal state.

CG32.7L is designed with two metal electrodes. One is connected to the power line and the other is connected to the grounding system. The electrodes are separated by a gas between them that has an insulating property. When an overvoltage exceeds the breakdown voltage, the electrodes create a spark across the gap, which acts as a current path and causes a discharge. The spark that is created also changes the gas properties, which results in an absorption of current and a sharp reduction of the overvoltage.

In order to ensure the proper functioning of CG32.7L, the surge arrester must be properly installed. It should be installed in a suitable position in the distribution network, and should be properly grounded and connected to the power line. Additionally, it is important to check the ratings of the GDT and make sure it is compatible with the application it is intended for. Finally, it should be inspected periodically to ensure it is working correctly.

In conclusion, CG32.7L is a popular gas discharge

The specific data is subject to PDF, and the above content is for reference