CGD06-S110V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Protection Relays & Systems play a critical role in all types of electrical networks by quickly detecting faults and taking the necessary actions to isolate the faulted area. Without protection relays, faults on the network would be impossible to locate and these faults could cause major disruption to equipment, people, and the environment. CGD06-S110V is a widely used protection relay & system that is designed to protect against excessive current, field faults, and arc flashes.

The CGD06-S110V consists of four components – an electrical current transformer (CT), a voltage transformer (VT), a relay device, and a current limiting device. The CT and VT measure the current and voltage on the network and send signals to the other components. The relay device is a type of overcurrent protection device that is set to trip when the current on the network exceeds the set threshold levels. This helps prevent large currents and arcing from damaging equipment or causing injury. The current limiting device further prevents large and dangerous fault currents by limiting the current flow through the relay device.

The CGD06-S110V is mainly used in medium voltage electrical networks. It can be used in both indoor and outdoor applications and is suitable for both AC and DC systems. It can be used to protect single and three phase networks as well as earth fault neutrals. Additionally, it can also be used to protect high impedance grounded networks.

The CGD06-S110V is an IP67 rated device, meaning it can be installed in harsh and dusty environments without requiring extra protection. It is certified for use in hazardous areas and is designed to withstand extreme temperature fluctuations, high vibration, and shock.

The protection relay & system works by monitoring the current and voltage on the network. When the current or voltage exceeds the set threshold levels, the relay device trips and the current limiting device is used to limit the current flow. This helps protect the network from excessive current and field faults. Additionally, the relay device can be configured to detect arc-flash incidents and open the fault circuit.

By using the CGD06-S110V protection relay & system, electrical networks can be protected from power surges, overvoltage, shorts circuits, high current, and arc flashes. This helps prevent equipment failure, reduce downtime, and improve overall network safety.

The specific data is subject to PDF, and the above content is for reference