Allicdata Part #: | 3M161097-ND |
Manufacturer Part#: |
CGXL-W |
Price: | $ 6.86 |
Product Category: | Uncategorized |
Manufacturer: | 3M |
Short Description: | COMFORT GRIP GLOVE CGXL-W WINTER |
More Detail: | N/A |
DataSheet: | CGXL-W Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 6.23700 |
5 +: | $ 5.92578 |
10 +: | $ 5.30145 |
25 +: | $ 5.14559 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
CGXL-W is an acronym for the Compact Gate X-ray Luminescence detector (CGXL) with a Wavelength detection system. It is used for nondestructive testing of welds, composites, and other metallic components. The detector is able to detect small changes in material thickness/volumes, as well as flux leakage and corrosion, due to its high sensitivity and resolution.
The CGXL-W is a combination of a gate and an X-ray luminescence system. The gate is the main X-ray beam, which is focused onto a sample. The X-ray luminescence system is a system which utilizes the X-ray emission from the material being tested. It works in tandem with the gate to increase the detection accuracy and sensitivity of the detector. In addition, the CGXL-W has a wavelength detection system, which is able to detect changes in the wavelength of X-rays being emitted from the material being tested.
The CGXL-W is used for nondestructive testing of welds, composites, and other metallic components. The detector is able to detect small changes in material thickness/volumes, as well as flux leakage and corrosion, due to its high sensitivity and resolution. It is used in a variety of industries, such as automotive, aerospace, and energy, due to its ability to accurately and repeatably detect minute changes in material. The detector can also be used in medical imaging, such as mammograms, as it is able to pinpoint the exact location of a lesion or other abnormalities.
The CGXL-W has two main working principles: X-ray attenuation and energy dispersive X-ray fluorescence (EDXRF). X-ray attenuation occurs when X-rays pass through a material. The material absorbs a certain amount of X-ray, which it then re-emits at lower energy levels. The difference between the amount of X-ray absorbed and the amount of X-ray re-emitted can then be used to measure the thickness and density of the material. On the other hand, EDXRF measures the X-ray fluorescence emitted by the material when it is excited by a higher-energy X-ray. The intensity of the fluorescence can then be used to measure the composition of the material.
The CGXL-W also allows for X-ray imaging. When the X-ray beam is focused onto a sample, the detector collects all of the X-ray photons which are scattered from the sample. The information collected from these X-ray photons can then be used to construct an image of the sample. This image can then be used to investigate the quality of a weld, the properties of a composite, or to detect corrosion in metallic components. The detector can also be used for industrial radiographic imaging, such as penetration imaging.
Overall, the CGXL-W is a versatile detector with a variety of applications. Its combination of a gate and X-ray luminescence system, as well as its wavelength detection system, give it the ability to accurately and repeatably detect minute changes in materials. It is also able to measure the thickness and density of materials, as well as to detect corrosion and measure the composition of materials. Finally, it can be used for industrial imaging, such as radiography and X-ray imaging. The CGXL-W is an indispensable tool for many industries, and is a cost-effective solution for nondestructive testing.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE