CIL10NR68JNC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are a type of components used in an electrical circuit to provide a fixed inductance. CIL10NR68JNC is a type of fixed inductor produced by Murata. Its application field and working principle will be discussed in this article.

1. Application Field of CIL10NR68JNC

CIL10NR68JNC is a high performance fixed inductor whose typical application field is high frequency filters, signal lines, power line interference suppression, and audio lines, etc. High performance is achieved by the construction of these components. The inductor element is wound with coils of enameled copper wire, and is then sputtered with high-performance metal particles. CIL10NR68JNC therefore combines stability, small size, and low resistance.

In particular, CIL10NR68JNC can be used in home audio engineering for noise suppression and look for ultra-low loss gap coupling between impedance and wires. With it, one can achieve effective run interference and maintain relatively low signal loss.

2. Working Principle of CIL10NR68JNC

The working principle of the CIL10NR68JNC is based on the basic concept of inductance. Inductance is the property of a conductor or coil of wire to resist a change in the current flowing through it. In essence, the inductor acts as a resistor to the flow of current. This resistance is known as inductive reactance, and is proportional to the frequency of the current.

What happens when a CIL10NR68JNC is connected to a circuit? When a potential difference is applied across the leads of the inductor, a magnetic flux is generated in the core. This magnetic flux interacts with the current passing through the inductor, creating a counter-emf in the form of an AC voltage. This AC voltage opposes the current in proportion to the flux linked with the inductor. Thus, a CIL10NR68JNC increases the resistance to AC signals in proportion to the frequency.

The CIL10NR68JNC can also be used to form an LC filter, which is useful for filtering out high-frequency noise from a power line. An LC filter is made up of a capacitor and an inductor connected in parallel. The inductor creates an opposition to the high-frequency signals, allowing the capacitor to pass only the low-frequency signals while blocking the low-frequency noise.

3. Conclusion

The CIL10NR68JNC is a high performance fixed inductor designed for use in a variety of applications. It has a relatively small size and low resistance, and can be used for noise suppression, gap coupling between low resistance and wires, and in LC filters for noise filtering. The CIL10NR68JNC is a versatile and reliable inductor that should be considered for any application that requires a reliable and efficient inductor.

The specific data is subject to PDF, and the above content is for reference