CLS03(T6L,CANO-O,Q

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CLS03 (T6L, CANO-O, Q) is a single-phase bridge rectifier with a reverse current blocking capability. This type of diode is often used in power supply circuits, such as SMPS (Switched Mode Power Supplies) and in some power conditioning applications. It is also used as a general purpose rectifier in electronic projects.

The CLS03 is constructed on a stud-type package and is constructed using metal oxide semiconductor (MOS) technology. The body of the device consists of four main part, the anode, the cathode, the collector, and the emitter. Its active area is used to block reverse currents and the internal structure is designed to provide the best possible thermal performance.

The anode and cathode of the device are connected to the collector and the emitter respectively. The three pins of the device are connected to the anode, cathode, and common terminal (which is also often also referred to as the midpoint terminal). The midpoint terminal is the point between the active terminals (anode and cathode) and does not carry any current but is necessary for the operation of the device.

The CLS03 has a maximum forward current rating of 2.5 A, maximum reverse voltage rating of 200 volts, and maximum surge current rating of 40 Amps. The device is designed for operation at a junction temperature of up to 105°C. The device is also available with a surge current protection option to prevent damage due to surges or short circuits.

The main application of the CLS03 is in power supply and power conditioning circuits. These types of circuits are used to obtain higher output power levels than can be obtained with other diode types and they are also used to improve the efficiency of power supplies, reduce the amount of heat generated and reduce the power factor of the power supply.

The CLS03 is also used in general purpose rectification applications, such as in sensing or detecting unregulated variations in DC output. It can also be used to replace other bridge rectifiers such as the CLS09, CLS11 and the R63.

The working principle of the CLS03 is fairly simple. When a positive potential is applied to the anode terminal, current will flow from the anode to the cathode and through the body of the device. This current will then be conducted to the midpoint terminal and will be directed in the direction of the applied voltage.

When the reverse voltage is applied to the diode, the injected minority carriers will not be able to pass through the depletion region, therefore blocking the reverse current. Therefore, the CLS03 can also be used in pulse applications, power factor correction circuits and other applications where a reverse current blocking capability is required.

The CLS03 is a versatile single-phase bridge rectifier that can be used in a wide range of applications. Its reverse current blocking capability makes it suitable for pulse applications, power factor correction circuits, and other power supply and power conditioning applications.

The specific data is subject to PDF, and the above content is for reference