CLVC574AQDWRG4Q1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip flops are an important type of digital logic circuits used in all kinds of digital systems. They are used to store and transfer digital data, remembering their state even when the power is off. The CLVC574AQDWRG4Q1 is an example of such a flip flop, which can be used in a variety of applications.

The CLVC574AQDWRG4Q1 is a four-bit edge-triggered flip-flop. It is comprised of four separate clocked D flip-flop circuits, each with two inputs, the SET and RESET signals, and one output, the Q signal. The four outputs can be linked together so that they all respond to the same clock signal. When the signal changes state, the four outputs will also change as appropriate. The CLVC574AQDWRG4Q1 is designed to integrate easily into larger systems, as it only requires 5V power to operate.

The operation of the CLVC574AQDWRG4Q1 is relatively simple. Each of the four flip-flops will change state when the clock signal changes. The SET and RESET inputs can be used to control the state change. If the SET signal is active, the output will change to the high state, regardless of the previous state. Similarly, if the RESET signal is active, the output will change to the low state. If both SET and RESET signals are active at the same time, the output will remain unchanged. The CLVC574AQDWRG4Q1 is edge-triggered so that it only changes state on the rising or falling edge of the clock signal, depending on the design.

The CLVC574AQDWRG4Q1 has numerous applications in digital systems. Firstly, it is commonly used as a simple latch or memory device. The flip-flops will remember the data that is set or reset as long as power is applied. This is useful when temporary data needs to be saved. Secondly, the flip-flops can be used as a binary counter. When the clock signal changes its state, the outputs will sequentially change in the form of a binary number. The outputs can be connected together to achieve higher resolution or increased register size. For example, if four flip-flops are connected in series, a 4-bit counter can be made.

In conclusion, the CLVC574AQDWRG4Q1 is a general-purpose four-bit edge-triggered flip-flop. It can be used in a variety of applications, from simple latching to binary counting. The CLVC574AQDWRG4Q1 is very versatile and is often used in digital systems.

The specific data is subject to PDF, and the above content is for reference