CMDSH05-45 TR

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	45V
Current - Average Rectified (Io):	500mA
Voltage - Forward (Vf) (Max) @ If:	470mV @ 500mA
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	100µA @ 30V
Capacitance @ Vr, F:	50pF @ 1V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	SC-76, SOD-323
Supplier Device Package:	SOD-323
Operating Temperature - Junction:	-65°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
CMDSH05-45 TR is a type of single rectifier. It\'s a discrete component that consists of a single PN junction, usually made from silicon and is used to convert alternating current (AC) electrical power into direct current (DC). It is mainly used in power supplies or to provide DC voltage and current for some specific applications such as plasma cutting torches, motors and other devices.Working Principle
Rectifiers are electronic components that convert alternating current (AC) into direct current (DC). They accomplish this by allowing current to only flow in one direction, while blocking it from flowing in the opposite direction. Typically, a rectifier consists of an anode and a cathode. When the anode is at a higher voltage than the cathode, it will allow current to flow in only one direction, allowing DC power to enter the circuit. When the anode is at a lower energy than the cathode, the rectifier will block current flow in either direction.CMDSH05-45 TR rectifier has a low forward voltage drop of 0.56V @ IF=20A. It has very low dynamic impedance at 0.68 Ohm, which reduces power losses as compared to other similar rectifiers. The maximum reverse leakage current is 400uA. The operating temperature range of this device is -55°C to +125°C.Applications
CMDSH05-45 TR is typically used in power supplies, air conditioning circuit, lighting control boards and metering applications. It is also suitable for electric vehicles and solar energy applications.The rectifier is used in DC power rail systems, high speed switching applications, and ac-dc converter circuits. Its low forward voltage drop and low power losses make it suitable for high-powered applications. It can also be used in junction field-effect transistor (JFET) biased circuits and high-speed power amplifiers.The device is especially suitable for the the control board of AC motors and controlling 3-phase motors in the electric vehicles power train.Conclusion
CMDSH05-45 TR is a type of single rectifier. It is used to convert alternating current into direct current. Its low forward voltage drop and low dynamic impedance make it suitable for power supply applications, electric vehicle applications, and solar energy applications. It is also suitable for use in air conditioning circuit, lighting control boards, metering applications, high speed switching applications and ac-dc converter circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description