CME375-4-B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common mode chokes, such as CME375-4-B, are electrical components that are used to block one type of current while allowing another type. They are widely applied in power and data communication systems, such as in LANs, switch systems, power converters, etc. Their primary purpose is to filter, suppress, and reduce conducted disturbance in these electrical systems.

The CME375-4-B is a common mode choke that can be used for EMC of power and data communications. It is a high power, low-frequency common mode choke with an optimal line impedance of 375 ohms over 4-40MHz. The core of the CME375-4-B is made from ferrite material, which is designed to provide high common mode impedance, low insertion loss, and higher breakdown voltages.

The working principle of a common mode choke, such as the CME375-4-B, is simple and can be explained in three steps. First, the common mode choke intercepts interfering signals. It does this by minimizing the capacitive coupling between source and ground in the system, which reduces the signal level of the interfering signal. Second, the common mode choke restricts the interfering currents. The choke is designed such that most of the interference current is restricted to the choke, limiting the amount of current that can flow in the system. Finally, the choke filters out the interference voltage, resulting in a reduction of the signal level. The choke’s inductance acts as a low-pass filter, which removes the high frequency components of the interference voltage.

The field of application of common mode chokes, such as the CME375-4-B, can be divided into two main categories: power and data communication. In power applications, the common mode choke helps protect electrical systems from overvoltage, overcurrent, and EM interference. It also provides better power line performance compared to traditional EMC components, such as capacitors and surge protectors. In data communication applications, the common mode choke helps reduce the effect of conducted interference on cables, connectors, and circuit boards. It also reduces the DC offset caused by ground loops, allowing for more reliable data transmission.

Common mode chokes, such as the CME375-4-B, have become increasingly popular in the past few years. They are relatively simple components that are easy to install and offer good electrical performance. Moreover, they are relatively inexpensive and can provide a cost-effective solution for EMC problems in power and data communication systems.

The specific data is subject to PDF, and the above content is for reference