CMF55110R00FKR639

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors have a cylindrical body with leads extending out from each end. CMF55110R00FKR639 is a through-hole resistor. It is designed to reduce voltage, divide currents, and control signal levels. As a component of an electronic circuit, it is commonly used in applications such as power supplies, motor control, filters and amplifiers.

CMF55110R00FKR639 is a standard through-hole axial resistor. It has an axial lead configuration with a lead spacing of 0.2 inches. Its flame-retardant construction has resistors made of ceramic and a binder material. Other features include a high power rating of 5.0 watts and a resistance range of 1.0ohm to1.5Mohm. It is also available in a wide range of operating temperatures, from -55°C to 150°C.

CMF55110R00FKR639 is used in a variety of applications such as automotive, consumer electronics, power supplies, and communications systems. It is suitable for use in high-power applications as a low-noise, low-resistance component. It is also used in motor control systems to reduce voltage levels and control current flow. In consumer electronics, the resistor is used to limit power and current in circuits with critical parameters that require an exact current link.

The operating principle of CMF55110R00FKR639 is based on Ohm\'s Law. This law states that the current in an electrical circuit is directly proportional to the voltage across it. In other words, the higher the voltage, the higher the current. The resistor reduces the voltage in the circuit, thus limiting the current. The amount of resistance is determined by the geometry and material used in the construction of the resistor. The size and shape of the resistor determine the amount of resistance that it will provide.

In conclusion, CMF55110R00FKR639 is a standard through-hole axial resistor that is used in a variety of applications. It is designed to reduce voltage, divide current, and control signal levels. Its flame-retardant construction has resistors made of ceramic and a binder material, and it has a power rating of 5.0 W and a resistance range of 1.0ohm to1.5Mohm. The operating principle of the resistor is based on Ohm\'s Law, which states that the current in an electrical circuit is directly proportional to the voltage across it. The resistor uses this law to reduce the voltage in the circuit, thus limiting the current.

The specific data is subject to PDF, and the above content is for reference