CMF55120R00FKEB39

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

The CMF55120R00FKEB39 is an example of a through hole resistor. It is used for providing the correct amount of electrical resistance needed in electronic circuit designs. The device works by allowing a predetermined amount of current to flow through it, removing the excess energy or resistance and preventing the circuit from overloading or generating too much static electricity. This type of resistor is typically used for high-temperature applications, and comes in different value and wattage ratings.

The CMF55120R00FKEB39 device is composed of a ceramic material that is coated with resistive metal or film. It has a through hole package which can be mounted on a printed circuit board. This device is thermally rugged and can withstand high temperatures up to 125 degrees Celsius. The device is 55 millimeters in length and 12 millimeters in width. It can handle up to a maximum power dissipation of 120 watts.

The device has a resistance value of 0.55 ohms. This value is typically chosen to limit the amount of energy a particular electronic device or system can draw. For example, if a 0.55 ohm resistive component is inserted into an electronic circuit, the amount of energy that circuit can draw or dissipate will be limited to 0.55 ohms. This value can be used to maintain power output and maximize efficiency.

The working principle of this device is based on the fact that the resistance of the through hole resistor limits the rate at which current can flow through the component. This is because the current has to pass through the ceramic material before it reaches themetal or film coating. This creates a barrier which limits the overall rate of current flow. This isto prevent circuits from overloading and short-circuiting.

The CMF55120R00FKEB39 is ideal for a variety of applications involving high-temperature applications such as aviation, automotive, military and industrial. Because it is thermally robust, it is able to withstand extreme temperatures. It is also suitable for power supplies, motor control circuits, and switches.

In conclusion, the CMF55120R00FKEB39 is a through hole resistor that is commonly used in high-temperature applications. It is composed of a ceramic material with a resistive metal or film coating. It has a through hole package which can be mounted on a printed circuit board. The device has a resistance value of 0.55 ohms and can handle up to a maximum power dissipation of 120 watts. The working principle of the device is based on the fact that the resistance of the through hole resistor limits the rate at which current can flow through the component.

The specific data is subject to PDF, and the above content is for reference