CMF5550R500BEEK

Series:	CMF
Packaging:	Bulk
Part Status:	Active
Resistance:	50.5 Ohms
Tolerance:	±0.1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Overview of Through Hole Resistors

Through hole resistors are one of the standard components used in electronic circuits. They are generally small components, usually encased in plastic or metal, and they contain a length of wire, or coil, which is usually made of metal and insulated to prevent short circuits. The most common types of through hole resistors are axial, radial, and universal.

CMF5550R500BEEK Overview

The CMF5550R500BEEK is a through-hole resistor manufactured by FURSE. It is a standard, fixed-value resistor with an effective resistance range of 5-50K ohms and a resistance tolerance of ±5%. The physical size of the CMF5550R500BEEK is 0.55" x 0.44" x 0.12" (14mm x 11mm x 3mm).

CMF5550R500BEEK Application Field and Working Principle

The CMF5550R500BEEK is a versatile resistor that has a variety of applications in the fields of electronics and electrical engineering. It has a wide range of applications in power management, current limiting, voltage regulation, and switching.The working principle of the CMF5550R500BEEK is based on the principle of Ohm\'s Law, which states that the current flowing in a circuit is directly proportional to the voltage applied across that circuit. In a resistor, the resistance value determines the amount of current that can flow through it; the higher the resistance value, the lower the current, and vice versa. The CMF5550R500BEEK has a fixed resistance value of 5-50K ohms, meaning that it can limit the current passing through it to a predetermined amount.The CMF5550R500BEEK can also be used to create voltage divider circuits. In a voltage divider circuit, two resistors are connected in series and the voltages at the junction of the two resistors is determined by the ratio of their resistance values. The CMF5550R500BEEK can therefore be used to divide the input voltage into two equal halves. This is useful in applications such as power management and voltage regulation, as it allows the precise regulation of the output voltage.The CMF5550R500BEEK is also commonly used in switching circuits. In switching circuits, a resistor is connected to a switch and when the switch is closed, the resistor will limit the current that can pass through the switch. This is useful in applications such as automotive systems, where the current can often become very high and need to be limited for the safety of the driver.The CMF5550R500BEEK is also used in current limiting circuits. In these circuits, a resistor is connected in series with the load and the resistor will limit the current that can pass through the load. This is useful in applications such as motor drives, where the current needs to be limited to avoid damage to the motor.

Conclusion

The CMF5550R500BEEK is a versatile through-hole resistor with a wide range of applications in the fields of electronics and electrical engineering. It can be used for power management, voltage regulation, switching, and current limiting, among other applications. It is a cost-effective and reliable component that is easy to use and is essential in any electronics projects.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description