CMR1F-10M TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes form one of the most important components in modern electronics. These specialized devices allow electricity to flow in only one direction and can be used for a variety of applications. The CMR1F-10M TR13 diode is just one of the many types of single-phase rectifiers available on the market today. These components are well known for their ability to convert alternating current into direct current. The following article will cover the application fields and working principle of CMR1F-10M TR13.

Overview of the CMR1F-10M TR13

The CMR1F-10M TR13 is a rectifier diode designed for use in low-power applications. The diode is a package of silicon-based materials encased in a molded plastic case. It has an average rectified forward current of 10mA with a peak repetitive reverse voltage of 100V. The maximum peak repetitive non-repetitive reverse voltage is the same as the peak repetitive reverse voltage, but the average non-repetitive current is lower at 1mA.

Application Fields of the CMR1F-10M TR13

The CMR1F-10M TR13 is designed primarily for use in low-power applications. These applications include power supplies, SCR/TRIAC speed controls, power switching/inversion circuits, and general-purpose blocking applications. It is well-suited to these applications due to its ability to control the flow of electrical current.

Working Principle of the CMR1F-10M TR13

The CMR1F-10M TR13 diode is a single-phase rectifier. This means that it is designed to allow current to flow in one direction and block current from flowing in the opposite direction. The exact working principle of the CMR1F-10M TR13 diode can be broken down into three stages: reverse-bias conduction, forward-bias conduction, and blocking.

Reverse-Bias Conduction

Reverse-bias conduction occurs when the diode is reversed-biased. This means that there is a higher positive voltage applied to the anode and lower negative voltage applied to the cathode. This causes almost no current to flow through the diode, as the potential barrier is too strong for current to flow.

Forward-Bias Conduction

Forward-bias conduction occurs when a higher negative voltage is applied to the anode and lower positive voltage is applied to the cathode. This causes a potential field to form that is conducive to current flow. At this point, the diode will act as a conductor and allow current to flow through.

Blocking

In this stage, the diode will block any current that is attempting to flow in the opposite direction. This occurs when the voltage applied to the anode and cathode is reversed, causing the potential field to become too strong for current to flow. The diode will remain in this state until the voltage is changed once again.

Conclusion

The CMR1F-10M TR13 diode is a single-phase rectifier designed for use in low-power applications. The diode works by allowing current to flow in one direction and blocking the flow of current in the opposite direction. The three stages of the working principle involve reverse-bias conduction, forward-bias conduction, and blocking. With its reliable performance and ability to handle low-power applications, the CMR1F-10M TR13 is a popular choice for many power supply, speed control, and other blocking applications.

The specific data is subject to PDF, and the above content is for reference