CMR1U-04M BK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single form an important component of common electronic circuits in modern day technology. The CMR1U-04M BK is a rectifying diode often used in a wide range of applications. The component is used in a variety of applications ranging from switching and high speed rectification, to heaters, power management systems and power supplies.

A diode is a two-terminal electronic component with an anode and a cathode that is capable of acting as an electrical rectifier, allowing an electrical current to flow in one direction while blocking current in the opposite direction. Rectifier devices are used to convert an alternating current (AC) into direct current (DC) by forming a bridge between a pair of terminals. The CMR1U-04M BK is one such device with a range of practical applications.

The CMR1U-04M BK is a 400-volt, 4-amp rectifier diode with a 200-A forward surge current rating. The component is made up of an anode and a cathode and is packaged in an axial form factor, utilizing a single-ended configuration to cancel the noiseless operation, scoping for special care circuits, and serve as an alternate for the space limited designs. It is commonly used in single-phase and three-phase AC-DC power supplies, uninterruptible power supplies, adapter circuits, and inverters.

The CMR1U-04M BK is constructed using a silicon wafer, which is an important factor in its working principle. Initially, when the anode voltage is greater than the cathode voltage, the diode checks the potential difference and allows current to flow in the forward direction across the diode. This current moves freely to the lower potential, thus allowing the current to flow across the diode gap in the form of holes, turning the diode into a switch mode. This is known as the forward bias of a diode.

The reverse bias is the opposite of the forward bias in which a potential greater than the potential applied to the anode is applied to the cathode. This results in the diode having a significantly reduced or completely blocked current flow. The CMR1U-04M BK’s internal resistance is less than 100 mΩ and can block the reverse of the external current up to 3,000 V. This prevents any damage and allows for the safe use of electrical power.

The CMR1U-04M BK also features a surge current of up to 200 A for 1.5 continuous seconds. This makes it ideal for circuit protection as it can protect against intermittent and unexpected current surges. Further, the device is able to dissipate 800 mW of power, reducing waste heat and extending the working life of the device.

Overall, the CMR1U-04M BK is an important component which can be used across a range of applications, contributing to the modern day usage of electronics in a wide array of fields. Its low forward voltage drop and low thermal impedance ratings make it suitable to handle high power applications such as power supplies and uninterruptible power supplies, as well as a variety of switching and high speed rectification tasks.

The specific data is subject to PDF, and the above content is for reference