CNX35U300W

Output Type:	Transistor with Base
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.400", 10.16mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 100°C
Vce Saturation (Max):	400mV
Current - DC Forward (If) (Max):	100mA
Voltage - Forward (Vf) (Typ):	1.15V
Current - Output / Channel:	100mA
Voltage - Output (Max):	30V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	--
Turn On / Turn Off Time (Typ):	20µs, 20µs
Current Transfer Ratio (Max):	160% @ 10mA
Current Transfer Ratio (Min):	40% @ 10mA
Voltage - Isolation:	5300Vrms
Number of Channels:	1
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

CNX35U300W is a type of optoisolator, which is a type of electrical component composed of an insulation barrier between two parts of circuits. It is composed of an LED or light-emitting diode on one side and a photodetector (usually a photovoltaic diode) on the other side. The optoisolator is generally used to electrically isolate one part of a circuit from the other while still providing signals and information from one part of the circuit to the other, without allowing actual electric current to flow in either direction. As explained, CNX35U300W is a type of optoisolator, specifically a transistor, photovoltaic output type.

CNX35U300W Application Field

There are many applications for optoisolators, including protecting sensitive electronic equipment from electrical transients. CNX35U300W, specifically, has a wide range of usage, such as industrial automation, robotics, PLCs, SCADA systems, and other control systems. It is generally used for signal conditioning in harsh electrical environments, especially those including noise and other interference, such as in industrial automation and robotics. It is also used in communication systems where electrical isolation between the transmitting and receiving portions of the circuit is necessary, as well as high-speed data transmission and medical equipment.

CNX35U300W Working Principle

The main working principle of CNX35U300W is that it uses light to bridge the gap between two parts of a circuit. The light-emitting diode (LED) generates a beam of light that is received by a photodetector, usually a photovoltaic diode, on the other side of the optoisolator. The photodetector then converts the light into an electrical signal, which is transmitted to the other side of the circuit. This is the main principle of optoisolation, which is used to achieve electrical isolation while still providing electrical signals between two parts of a circuit.

Conclusion

CNX35U300W is a transistor, photovoltaic output type of optoisolator, which is used for many industrial applications, such as in automation, robotics, communication systems, high-speed data transmission, and medical equipment. Its main working principle is that it uses light to bridge the gap between two parts of a circuit, with a light-emitting diode (LED) on one side and a photovoltaic diode (photodetector) on the other. This optoisolator provides electrical isolation while still providing electrical signals between two parts of a circuit, making it an ideal component for electrical isolation in harsh electrical environments.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description