CNX35US

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Number of Channels:	1
Voltage - Isolation:	5300Vrms
Current Transfer Ratio (Min):	40% @ 10mA
Current Transfer Ratio (Max):	160% @ 10mA
Turn On / Turn Off Time (Typ):	20µs, 20µs
Rise / Fall Time (Typ):	--
Input Type:	DC
Output Type:	Transistor with Base
Voltage - Output (Max):	30V
Current - Output / Channel:	100mA
Voltage - Forward (Vf) (Typ):	1.15V
Current - DC Forward (If) (Max):	100mA
Vce Saturation (Max):	400mV
Operating Temperature:	-40°C ~ 100°C
Mounting Type:	Surface Mount
Package / Case:	6-SMD, Gull Wing
Supplier Device Package:	6-SMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output

Optoisolators, also known as optical isolators or optocouplers, are used to isolate various electronic components from one another. Optoisolators allow reliable transfer and reception of electrical signals without direct physical contact between the sending and receiving devices. The CNX35US is an optoisolator, specifically a type known as a Transistor, Photovoltaic Output.The photovoltaic optoisolator, or optocoupler, consists of an emitter which sends light to a receiver. The receiver then converts this light into an electrical signal. This signal is then processed by the optoisolator\'s electrical components. The optoisolator then produces an output signal which can be used to control or activate the target device.The CNX35US optoisolator is typically used for switching applications. It can be used to control the input/output voltage and/or current of the target device. The device can also be used to control the electrical energy stored in a circuit, such as in a flyback transformer. It is also suitable for use in overvoltage protection circuits.The CNX35US is a three-terminal optoisolator. It consists of an infrared emitting diode (IRED), a NPN bi-colour phototransistor, and an emitter-follower opto-transistor (EFT). The LED is the light source for the optoisolator and is driven with a constant current. The photodiode of the phototransistor is the light receiver. The NPN phototransistor is used for detection and amplification of the received light. The EFT is used for voltage regulation and current amplification.The output of the CNX35US optoisolator can be either a regulated voltage or a regulated current output, depending on the application. The output is electrically isolated from the input and is designed to be compatible with a variety of load types. The output can be clamped to limit its current and/or voltage.The CNX35US has several features which make it suitable for various applications. It has a high input/output isolation voltage and a wide operating temperature range. It has a compact size for easy installation and a low power consumption for increased efficiency. It also has an extended life expectancy due to its durable construction.Overall, the CNX35US is a versatile optoisolator which can be used for various switching applications. It has a high isolation voltage, a wide operating temperature range, and a small size. Its low power consumption and long life make it an ideal choice for applications where reliability is important.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description