CNY64AGRST

Output Type:	Transistor
Supplier Device Package:	4-SMD
Package / Case:	4-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 85°C
Vce Saturation (Max):	300mV
Current - DC Forward (If) (Max):	75mA
Voltage - Forward (Vf) (Typ):	1.32V
Current - Output / Channel:	50mA
Voltage - Output (Max):	32V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	2.4µs, 2.7µs
Turn On / Turn Off Time (Typ):	5µs, 3µs
Current Transfer Ratio (Max):	300% @ 5mA
Current Transfer Ratio (Min):	100% @ 5mA
Voltage - Isolation:	8200Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

• What Is CNY64AGRST?

CNY64AGRST is a solid-state opto-isolator, also known as an optocoupler or photocoupler, that serves as an exact analog of a two-way galvanic isolation switch. This device consists of a light-emitting diode (LED) optically coupled to a semiconductor photodiode in a compact 8-pin DIP package. The CNY64AGRST functions as an on-off switch by acting as an electrical insulator between independent control circuits and allowing signals to pass between them without requiring a direct electrical connection.

• CNY64AGRST Application Field

The CNY64AGRST optocoupler is a versatile device that offers a variety of uses in various applications. It can be used to protect signal lines from dangerous inductive load and/or high-voltage lines, as well as to control and switch circuits at remote locations with a single digital switch. In addition, it can also be used to isolate two or more analog signals from each other, without the risk of short circuits. CNY64AGRST optocouplers are also ideal for applications involving motor-controlling, power-supply sequencing, low-voltage circuit interruption, and signal delay control.

• CNY64AGRST Working Principle

The CNY64AGRST optocoupler works by detecting and then amplifying tiny voltage changes that occur between its two terminals. The LED is used to detect small voltage changes in the input circuit and convert them to light, which is then directed to the photodiode at the other end. When the diode receives the light, it is converted back into a voltage that is larger than the original source voltage. The amplified signal is then fed back to the output circuit, where it can be used to control the circuit\'s applied voltage or current. The working principle of this optocoupler is based on Faraday\'s law of induction, which states that changes in electric fields can induce a voltage in a nearby circuit. The LED\'s light-emitting diode produces a voltage potential between its two electrodes when exposed to light, which is then transferred to the photodetector. The photodetector receives the voltage and amplifies the signal to a larger value that can then be used to control the output circuit.To sum up, CNY64AGRST opto-isolators are used to provide electrical isolation between two circuits while transferring information or signals from one to another. They are ideal for applications involving motor control, analog signal isolation, power supply sequencing, and circuit interruption. Through its use of Faraday\'s law of induction, the CNY64AGRST can detect and amplify very small voltage changes in its input circuit and send it to the output circuit, where it can be used to control the applied voltage or current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description