CP000510K00JE663

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are among the most widely used types of resistors. This type of resistor is used for a variety of applications, including power dissipation, temperature coefficient, and frequency attenuation. The CP000510K00JE663 is one type of through hole resistor and is designed to meet the needs of many different industries, from telecommunications to instrumentation, along with various sizes and specifications.

The CP000510K00JE663 through hole resistor has a power rating of 0.5 Watts and is quite adaptable for a variety of applications. It features a rectangular metal oxide film element construction and a protective heat-resistant epoxy coating. This type of resistor also features a 3.2 ohms resistance with a tolerance of +/- 10%. In addition, the resistor has a voltage rating of 2 volts and a temperature coefficient of approximately 500 PPM/°C. This resistor also offers a frequency attenuation of up to 1MHz.

The working principle of the CP000510K00JE663 resistor is based on the same concept as any resistor – any applied voltage across it will create a current. This current is proportional to the resistance of the resistor, and the voltage will be equal to the current times the resistance. The resistor’s resistance value is determined by the size and thickness of the resistor’s element. The CP000510K00JE663 resistor’s rectangular element has a thickness of 0.5 Watts and is able to withstand up to 2 volts. The range of the resistor’s resistance value is determined by its tolerance rate, and in the case of the CP000510K00JE663 resistor, the resistance is 3.2 ohms +/- 10%.

The CP000510K00JE663 through hole resistor features a variety of uses and applications, such as providing an electrical pathway for the current to travel through and creating a barrier between two circuits. It can also be used to maintain the stability of a circuit and regulate the flow of current. This type of resistor is also commonly used in voltage dividers to divide the voltage of a power supply. The CP000510K00JE663 resistor can be used in a wide range of devices such as consumer electronics, automotive electronics, and other controllable systems.

In order to ensure the highest tolerance with the CP000510K00JE663 resistor, it is important to note that the initial resistance should be measured with an accurate ohmmeter. This will allow for precise calibration and can save time and money in the long run. Additionally, when installing the resistor, it is important to ensure that the resistor is properly grounded and has adequate insulation from other electronic components.

The CP000510K00JE663 through hole resistors are a reliable and cost effective solution, making them ideal for a wide range of applications. This type of resistor offers superior power dissipation with a maximum voltage rating of 2 volts and a temperature coefficient of 500 PPM/°C. It also offers a frequency attenuation of up to 1MHz. The CP000510K00JE663 resistor is designed to be used in many different industries that require a reliable and economical solution.

The specific data is subject to PDF, and the above content is for reference