CP00057K500KE663

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A through hole resistor is a type of resistor that utilizes a hole in order to provide a connection between two components or circuits in an electronic device. The hole typically consists of a metal strip or wire that extends through an insulating material, such as a ceramic substrate or plastic sheet. The thickness of the metal strip or wire determines the resistance of the resistor. Through hole resistors are also referred to as THRs.

The CP00057K500KE663 is an example of a through hole resistor. It is an axial-lead device and consists of 4 pins that have been specially designed to allow for convenient installation in restricted areas. The CP00057K500KE663 has a nominal resistance value of 500KΩ which is typically accurate to within ± 10%.

Application Field

Through hole resistors are used in a wide variety of circuitry applications including power supplies, signal conditioning, amplification, and impedance matching. They are commonly used as current limiting resistors, voltage divider networks, power supplies, rectifiers, and as thermal overload protectors in electric motors and other types of equipment. The CP00057K500KE663 is no exception.

The CP00057K500KE663 is most frequently used in power supplies and other automotive applications as a drain resistor. This function is used to drain off excess current to help prevent damage from excessive current passing through the circuit. In addition, the CP00057K500KE663 can be utilized in audio applications as well as impedance matching in high frequency circuits.

Working Principle

The working principle of the CP00057K500KE663 is based on Ohm’s Law, which states that:

V = I x R

Where V is the voltage, I is the current, and R is the resistance in ohms. The CP00057K500KE663 has a nominal resistance value of 500KΩ, which means that when a voltage of 10V is applied across it, the current supplied by the resistor would be 20mA (10V ÷ 500KΩ).

The CP00057K500KE663 is a non-inductive type through hole resistor meaning that its resistance does not vary with changes in the applied voltage or current. This is extremely beneficial in applications that require a stable voltage or current such as in power supply circuits. In addition, this type of resistor also has a high accuracy rating and is able to maintain its high resistance value even when subjected to extreme temperatures.

The dimensions and mounting hole measurements of the CP00057K500KE663 are as follows:

• Dimensions: 0.866” (dia.) x 0.858” (len.)
• Mounting Hole Diameter: 0.091”

These measurements make the CP00057K500KE663 device suitable for a wide range of circuit boards and applications.

Conclusion

As noted, the CP00057K500KE663 is an example of a through hole resistor. It is used in a variety of applications including power supplies, audio applications, impedance matching, and other electronic circuits. The resistance value of the CP00057K500KE663 is 500KΩ, and is typically accurate to within ± 10%. Additionally, the CP00057K500KE663 is Non-Inductive and also features high accuracy and stability even when subjected to extreme temperatures.

The specific data is subject to PDF, and the above content is for reference