CP000522R00KE66

Series:	CP
Packaging:	Bulk
Part Status:	Active
Resistance:	22 Ohms
Tolerance:	±10%
Power (Watts):	5W
Composition:	Wirewound
Features:	Flame Proof, Safety
Temperature Coefficient:	±400ppm/°C
Operating Temperature:	-65°C ~ 275°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.875" L x 0.375" W (22.22mm x 9.52mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Resistors are devices that reduce a circuit\'s current flow and voltage level. The CP000522R00KE66 is a Through Hole Resistor. It is an axial leaded, metal film, 3-terminal, high stability, low-inductance, surface-mount type device.

Application

The CP000522R00KE66 can be found in a wide array of electronic applications. For example, it can be used as a part of a voltage divider circuit, where its resistance level is adjusted to divide input voltage into two or more output voltages. It can also be used to reduce the current of the circuit, which is done by introducing a counter electrical current, which is also called an impedance, in the form of a resistor. When used as a voltage divider, the CP000522R00KE66 should be chosen based on its resistance tolerance and voltage limit, since it affects the accuracy of the circuit’s operation. In order to determine the required resistance, the target voltage of the circuit should be calculated and the desired current flow should be estimated.

Working Principle

The CP000522R00KE66 resistor operates on a simple yet efficient principle. The device is constructed from a ceramic or metal material that can resist the flow of current. This material is the same for all types of resistors and is known as the resistive element. The element provides the resistance and is connected to two terminals, which allow current to flow through the resistor in either direction.When current flows through the resistor, a small amount of additional energy is lost in the form of heat. This heat is generated due to the current flowing through the resistive element, which converts some of the energy into heat. This is known as Ohm’s Law and can be written as V=IR, where V is the voltage difference, I is the current, and R is the resistance. The greater the current passing through the resistor, the more energy is converted into heat. This is why resistors produce heat when conducting electric current. This heat can be dissipated through a heat sink or simply by allowing the resistor to cool in the open air. The CP000522R00KE66 is designed to have good linearity in its resistance compared to other resistors and a steeper resistance curve for better accuracy. Therefore, it is often used when high accuracy is required, such as in voltage divider circuits.

Conclusion

The CP000522R00KE66 is an axial leaded, metal film, 3-terminal, high-stability, low-inductance, surface mount type resistor. It is a versatile device that is used in a variety of applications, such as voltage dividers, current limiters and as a heat dissipater. Its working principle is based on the resistance of a resistive material which converts part of an electrical current into heat. The CP000522R00KE66 is chosen based on its resistance tolerance and voltage limit, and it has good linearity and accuracy for many electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description