CP000524R00JE663

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components used in circuits to limit or control the current flow. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. CP000524R00JE663 is a through hole resistor, which is a resistor that is soldered to the printed circuit board by passing it through a hole and soldering on either side. It is a very common type of resistor, and can be used for applications such as voltage dividers, dc bias networks, time delay circuits, pulse generators, low-pass filters and pulse-width modulators.

Application Field

CP000524R00JE663 can be used in a variety of applications, ranging from low-power analog circuits to high voltage protection, and anything in between. It is especially well suited for applications such as power supply circuits (e.g., contactors, fuses, voltage regulators, etc.), current limiting/protection circuits (e.g., current limiters, diode surge protectors, etc.), high voltage precision overload circuits (e.g., voltage limiters and crowbar protectors), and time delay relays.

This product is also ideal for automotive and medical applications, such as bleeding resistors, and in instrumentation and test applications, such as filter networks, current limiting, direction finding, over-voltage protection, voltage divider networks, current measurement, signal translation and circuit protection.

Working Principle

CP000524R00JE663 works by converting electric energy or power into heat energy. This is done by taking advantage of the fact that current flow produces electric resistance. This electric resistance in turn generates heat energy, which limits the current flow according to the resistance of the resistor. The greater the resistance, the more heat is produced and the less current can flow through it. By varying the resistance of the resistor (CP000524R00JE663) it is possible to precisely control the amount of current that will pass through it.

The resistor works by having two terminals, or connections, which allow the current to flow through it in order to be dissipated as heat. The current enters the resistor at one terminal and is blocked at the other terminal. The material that makes up the resistor will have a certain resistance, which then determines how much of the current can flow through it. The resistance of the material of the resistor will also determine how much of the heat generated will be absorbed.

The design of the CP000524R00JE663 also plays a role in its working principle. The resistor is designed to reduce the resistance at the terminals, reducing the amount of heat that is created, and increasing the amount of power that can pass through the resistor before it begins to overheat and burn out. This makes it suited for applications that require higher power levels, as the resistor can handle more current before burning out, or where precision is paramount.

In conclusion, CP000524R00JE663 is an example of a through hole resistor, and is very common in circuit design. It can be used for a variety of applications, from low-power analog circuits to high voltage protection, and can offer precision and protection in current limiting and circuit protection applications. It can be used in automotive and medical applications as well as instrumentation and test applications. The working principle of the resistor is based on the fact that current flow creates electric resistance, which produces heat energy. By controlling the resistance, it is possible to precisely control the current flow.

The specific data is subject to PDF, and the above content is for reference