CP0007160R0JE66

Series:	CP
Packaging:	Bulk
Part Status:	Active
Resistance:	160 Ohms
Tolerance:	±5%
Power (Watts):	7W
Composition:	Metal Oxide Film
Features:	Flame Proof, Safety
Temperature Coefficient:	±400ppm/°C
Operating Temperature:	-65°C ~ 225°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	1.378" L x 0.394" W (35.00mm x 10.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Resistors are widely used in electrical and electronic circuits for their ability to control current. Through hole resistors refer to resistors with leads that are connected to the resistance element in a manner that allows the resistor to be mounted into a drilled hole. CP0007160R0JE66 is a through hole resistor that has a fixed resistance value, meaning it is not adjustable.

Application Fields

Through hole resistors are used in a variety of applications, the primary being to limit current flow, to adjust signal levels, to divide voltages, to define gain, and to terminate transmission lines.In terms of electrical and electronic circuits, resistors play a major role in controlling a wide variety of parameters like current flow, voltage drops, and signal levels. The primary purpose of a through hole resistor in any circuit is to limit the amount of current that can pass through it. Through hole resistors can be used in power circuits, as they can prevent current overloads and resultant circuit damage.These resistors are also used to divide voltage, while enabling current flow. Resistors are often used to adjust signal levels, either so that an overload can be avoided, or to provide the correct voltage or current to an input circuit. These resistors can also be used to define gain in an active circuit, as they are able to control the amount of current passing through an active circuit\'s transistors. Through hole resistors are often used to terminate transmission lines, as they are able to provide the correct impedance level for the matching of components.

Working Principle

The working principle of the CP0007160R0JE66 resistor is based on Ohm\'s Law. Ohm\'s Law states that the current through a resistor is directly proportional to the voltage across it, for a fixed value of resistance. This fixed resistance is provided by the resistor circuitry. The resistor is made from the combination of two or more materials, one of which has a higher resistance than the other. The resistance of the combined material is determined by a combination of different factors such as the ratio of the material, temperature, and the surrounding environment. By altering these factors, the resistance of the composite material can be controlled. This is the basis of the working principle of the CP0007160R0JE66. The resistance is set at a predetermined value which can be changed depending on the application and its requirements. The CP0007160R0JE66 is a through hole resistor, meaning that it is mounted in a drilled hole and its leads are connected to the resistance element. This allows the resistor to easily accommodate changes in the environmental conditions, thus making it suitable for a wide range of applications.

Conclusion

The CP0007160R0JE66 is a through hole resistor that is widely used in electrical and electronic circuits due to its ability to control current flow, voltage drops, signal levels, and gain. This resistor is based on Ohm\'s Law, and its resistance is determined by several factors such as ratio of the materials, temperature, and the environment. Since it is a through hole resistor, it can be easily accommodated in different environments, making it suitable for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description