CP00071K000JE663

Series:	CP
Packaging:	Bulk
Part Status:	Active
Resistance:	1 kOhms
Tolerance:	±5%
Power (Watts):	7W
Composition:	Metal Oxide Film
Features:	Flame Proof, Safety
Temperature Coefficient:	±400ppm/°C
Operating Temperature:	-65°C ~ 225°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	1.378" L x 0.394" W (35.00mm x 10.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: CP00071K000JE663 Application Field and Working Principle

Through Hole Resistors, or THR, are widely used in electronics to control the current in circuits. The most common type of THR is a CP00071K000JE663, which is a radial, through-hole resistor. This type of resistor is designed with two lead wires that are bent at a 90° angle and mounted on the circuit board through holes. CP00071K000JE663 resistors are used in a variety of circuits, such as amplifiers, motor control circuits, power supplies, and clock circuits.The CP00071K000JE663 resistor works by providing resistance to the flow of electricity, which helps regulate the current in the circuit. This type of resistor has a number of advantages, including low cost, a small package size, and high reliability. The CP00071K000JE663 resistor is also relatively simple to use and install.When it comes to the application field and working principle of the CP00071K000JE663 resistor, there are several key points to consider. First, CP00071K000JE663 resistors are typically used in DC, or direct current, applications. This means that the resistance of the resistor is independent of the frequency of the signal that is being passed through the circuit. Additionally, the resistance of the resistor is determined by two factors: the amount of resistance that the resistor can provide, and the current that is passing through the circuit.The current passing through the resistor is determined by the voltage applied to the resistor and the net resistance of the circuit. The resistance provided by the CP00071K000JE663 resistor helps to regulate the current of the circuit, thus improving its efficiency and stability. In addition, this type of resistor helps to reduce the potential for unexpected temperature rises.When it comes to installation, CP00071K000JE663 resistors are relatively easy to use due to their simple design. The lead wires of the resistor are fitted into two holes in the circuit board. The installation is usually completed by using a soldering iron to ensure that the contact is secure and the connection is solid. Once the connection has been established, the desired resistance is adjusted by turning the soldering iron either clockwise or counterclockwise.When it comes to maintenance, the CP00071K000JE663 resistor is very low-maintenance and should only require occasional cleaning and checking for proper operation. If any problems are detected, it is important to inspect the connection and replace any components that are no longer in good working order. In addition, if any adjustments are needed, it is important to re-solder the resistor to ensure that the connection is secure.In conclusion, the CP00071K000JE663 resistor is a versatile, reliable, and low-cost component that is used in a variety of applications. Its working principle and installation process are relatively simple, and the resistor requires minimal maintenance to keep it functioning properly. This type of resistor can be used to effectively regulate the current in direct current circuits, providing greater efficiency and stability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description