CP00076K200JE66

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electrical components that allow current to flow through them in a specific and predictable manner.The CP00076K200JE66 is such resistor that provide resistance to the flow of current. It has many application fields, such as controlling current in circuits, as a voltage divider, for voltage sensing, and as a load resistor. This article will focus on the application field and working principle of the CP00076K200JE66.

The CP00076K200JE66 is generally used in applications where it is necessary to achieve a precise current flow. They are commonly used in low-voltage and low-power applications. This resistors typically have a large resistance value, making them suitable for applications where very little power is required, such as for current sensing. For higher power applications, larger resistances are needed.

In addition to current sensing, the CP00076K200JE66 can be used as a voltage divider. These resistors are used in circuits to create voltage drops. They are connected in series with one another, each one providing a specific resistance value. When voltage is applied to the circuit, the current is divided between the resistors, with each one receiving a portion of the voltage according to its resistance value.

The CP00076K200JE66 can also be used for voltage sensing, allowing a microcontroller or other device to measure the voltage in a circuit. In this application, the resistor is connected in series with a voltage source. The current from the voltage source is divided between the resistor and the voltage source. The voltage drop across the resistor is measured, providing a value for the voltage in the circuit.

Finally, the CP00076K200JE66 can be used for load resistors. In this application, the resistor is connected in series with a load (such as a motor, an LED, or a transistor). The current is divided between the resistor and the load, with the resistor receiving a portion of the current according to its resistance value. The load receives the remainder of the current, allowing it to operate properly.

The working principle of the CP00076K200Je66 is based on Ohm’s law, which states that the current through a resistor is proportional to the voltage applied across it. In other words, the current through the resistor is determined by the voltage applied and the resistance value of the resistor. The higher the voltage, or the lower the resistance, the higher the current will be.

In summary, the CP00076K200Je66 is a through-hole resistor that can be used for a wide range of applications, including current sensing, voltage sensing, and as a load resistor. Its working principle is based on Ohm’s law, which states that the current through a resistor is proportional to the voltage applied across it.

The specific data is subject to PDF, and the above content is for reference