CP00106K800JE663

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are used in many electronics projects as basic components for a variety of different types of circuits. The CP00106K800JE663 is a Through Hole Resistor capable of providing a reliable and accurate resistance in any given application. It is a radial leaded resistor, with two terminals and a resistance value of 80K ohms.

The Through Hole Resistors come in various forms, including the CP00106K800JE663. Through Hole Resistors are commonly used in circuits because of the ease of installation and the ability to customize their resistance values by focusing on the types of resistors that are available. Due to its small size, the CP00106K800JE663 is suitable for a wide range of applications where a small resistor is needed.

The CP00106K800JE663 is commonly used for applications such as bypassing audio signal lines, reducing current, increasing voltage, frequency response modulation, and decoupling power supplies. In addition, they can also be used to reduce the overall impedance of a circuit, eliminating any undesired noise that may be created. These resistors having a voltage rating of 2 Watts and a power rating of 2 Watts means they can be used for many different applications. Their resistance is highly accurate and close to its printed value.

The working principle of the CP00106K800JE663 is similar to most other resistors. They work by reducing the current flow within the circuit. This is done by adding resistance to the circuit, which then reduces the available current. The resistance of the CP00106K800JE663 is adjustable and can be tailored for special applications. The CP00106K800JE663 works by forming an electrical barrier between two points of a circuit, limiting the current between those points.

The CP00106K800JE663 is composed of a silicon-oxide film around which is enameled wire. When electrical current flows through the resistor, its electrons move through the resistor\'s resistance wire and vibrate in the oxide film, some of the electrical energy is converted into heat energy. This heat is then transferred away from the resistor, reducing the amount of electrical energy within the circuit, and thus, reducing the current.

The CP00106K800JE663 can be used in a variety of applications where an accurate and reliable resistance is needed. Its resistance value is accurate and its relatively small size makes it very suitable for many different applications, as its size makes it easily mountable into most circuit boards. The resistor\'s resistance is adjustable and can be tailored to suit specific applications and it also has a high temperature rating of 85°C.

From the above discussion, it can be seen that the CP00106K800JE663 is a versatile and reliable Through Hole Resistor, capable of providing an accurate and dependable resistance in any given application. Its small size means it can be easily installed into a variety of circuits and its resistance can be adjusted to suit specific applications. As such, it makes an ideal choice for many different types of electronics applications.

The specific data is subject to PDF, and the above content is for reference