CP0010820R0JE66

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are a type of resistor commonly found in electronic circuits, and CP0010820R0JE66 is a type of through hole resistor. What are they used for and how do they work?

What Are Through Hole Resistors?

Through Hole Resistors are, as the name suggests, resistors that are mounted through holes on a printed circuit board (PCB). They are leaded components, which means that they have two leads; one that is attached to the component body, and one that is attached to the PCB. Through Hole Resistors consist of a resistive element, usually an oxide-coated sheet of metal, and can be used in a variety of electronic circuits, from the power supply to the audio output stage. They are generally used to regulate current, voltage and signal levels, as well as to reduce noise.

What is the CP0010820R0JE66

The CP0010820R0JE66 is a through hole resistor from the Vishay family, and has a resistance of 0.20 ohms. It is rated for a continuous current of up to 8 amps and a rated voltage of 150 volts. It is rated for a maximum operating temperature of 105°C, and can be used in both pulsed and steady-state applications.

Application Field and Working Principle

Through hole resistors such as the CP0010820R0JE66 can be found in a variety of electronic applications. In power supply equipment, they are used to regulate the voltage and current levels, and also provide overvoltage and overcurrent protection. In audio applications, through hole resistors can be used to attenuate the signal level, as well as to reduce high-frequency noise. In motor control circuits, they are used to limit the current flow to the motor, and also provide feedback regarding the motor’s speed and position.

The working principle of a through hole resistor is based on Ohm’s law; when a voltage is applied across a resistor, a current will flow through the resistor. Depending on the resistance of the resistor, the current will be either lower or higher than the applied voltage. Through hole resistors, such as the CP0010820R0JE66, are designed to resist a certain amount of current, and the amount of current that will flow through the resistor can be determined by calculating the voltage drop across it.

Conclusion

The CP0010820R0JE66 is a through hole resistor, commonly used in applications requiring current regulation, overvoltage and overcurrent protection, signal attenuation and noise reduction. Its working principle is based on Ohm’s law, and it can be used in both pulsed and steady-state applications.

The specific data is subject to PDF, and the above content is for reference