CP0805A0836EWTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Radio frequency or RF directional couplers are an important part of RF systems. They are used in a wide variety of applications requiring signal conditioning and signal distribution. The CP0805A0836EWTR, which is based on a 50 ohm ferrite core RF directional coupler, is a particularly effective solution that offers strong coupling and rapid signal acquisition. This article provides an overview of the applications and working principles of the CP0805A0836EWTR that allow it to provide reliable performance in challenging operating environments.

The CP0805A0836EWTR is a general purpose RF coupler designed for use in wireless systems, communications, and RF test and measurement equipment. It operates in the 500MHz-4GHz frequency range and has a nominal power handling capability of up to 1000mW. It is an axial-in-radial-out (AiR) coupler with a 3-port hybrid RF input mechanism that combines and splits signals as required. This allows a single input to be used to direct signals to multiple destinations and vice versa. The coupling factor of the CP0805A0836EWTR is close to unity and is designed for use with SMA male or female connectors. The capacitor in the coupler has been designed for low reactance, providing very low insertion loss.

The CP0805A0836EWTR is suitable for a wide range of applications. One of the most common applications is as an antenna combiner or splitter, allowing multiple antennas to be connected to a single source of radio frequency energy. This is particularly useful for applications such as multi-beam antenna arrays, where a single input is used to split the signal and direct it to multiple antennas. It can also be used as a signal conditioning device, allowing a signal from one antenna to be directed to two or more destinations without compromising signal quality. The coupling factor of the CP0805A0836EWTR is also useful for RF measurements, where it can be used to determine the strength of each of the signals being measured.

The inner workings of the CP0805A0836EWTR are based on the principles of magnetic induction. The RF input signal is coupled to the secondary winding of the ferrite core, which in turn induces an equal yet opposite voltage in the primary winding. This voltage creates a voltage across the capacitor, which is connected between the center tap of the primary and the output lead. The voltage across the capacitor is opposite in phase to the input signal, creating a 180-degree phase shift. This phase-shifted signal is then directed to the output port. The copled signal is then amplified, depending on the type and the amount of coupling desired.

The CP0805A0836EWTR is an ideal choice for many RF directional coupler applications. Its wide frequency range and high power handling capability coupled with its low insertion loss make it an ideal solution for antenna splitting and signal conditioning. Its strong coupling factor allows it to be used for signal measurements, and its small size makes it ideal for embedded applications. All of these features, as well as its low cost, make the CP0805A0836EWTR an excellent choice for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference