CP0805A1441EWTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A RF directional coupler is a passive device which couples a fraction of the RF power propagating in one transmission line or waveguide to another waveguide or transmission line, as used in radio frequency (RF) systems. The CP0805A1441EWTR is one such coupler. It has an isolation rating of 55 dB, an insertion loss of 0.4 dB, and a VSWR rating of 1.2:1. The typical passband frequency range is 4 to 6.25 GHz, with a typical coupling coefficient of 12 dB. This device is well-suited for applications such as RF power monitoring, antenna directional measurements, distortion measurements, frequency spectrum analysis, and cable loss testing.

The CP0805A1441EWTR is an eight-port, 8-way directional coupler. The device features four input/output ports, four reference/isolator ports, and one common port. The device can be used to separately measure the forward and reverse power on the four input/output ports, or to measure the absolute power on the four input/output ports. The four reference/isolator ports can be used to measure the input/output power in the presence of other RF signals, such as interference signals or reflected signals, as well as to measure the output power of two different units under test.

The working principle of the CP0805A1441EWTR is based on the transmission line principle of energy transfer between points. Thisdevice features a network of four single-ended and four balanced transmission lines that couple the signal energy from one port to another. The device is designed such that the total signal power reflected at any port is minimized. The maximum input power rating of the device is typically 10 milliwatts, with a maximum operating frequency of 6.5 GHz.

The CP0805A1441EWTR is well-suited for a variety of applications. It can be used for antenna pattern measurements, distortion measurements, gain mismatch measurements, and other similar measurements. It can also be used for RF signal isolation and attenuation, as well as for intermodulation distortion (IMD) and spectrum analysis. It can also be used for cable and connector loss measurements, as well as for network performance and simulating frequency-dependent device losses.

In summary, the CP0805A1441EWTR is a versatile RF directional coupler. It is designed for a variety of applications, including antenna pattern measurements, signal isolation and attenuation, and distortion measurements. It features four input/output ports and four reference/isolator ports. The device is capable of handling up to 10 milliwatts of input power at frequencies up to 6.5 GHz. The device features a network of four single-ended and four balanced transmission lines that couple the signal energy from one port to another. This enables the device to measure the forward and reverse power on the four input/output ports, as well as to measure the absolute power on the four input/output ports.

The specific data is subject to PDF, and the above content is for reference