CPR20220R0JE66

Series:	CPR
Packaging:	Bulk
Part Status:	Active
Resistance:	220 Ohms
Tolerance:	±5%
Power (Watts):	20W
Composition:	Metal Oxide Film
Features:	Flame Proof, Safety
Temperature Coefficient:	±400ppm/°C
Operating Temperature:	-65°C ~ 225°C
Package / Case:	Radial
Supplier Device Package:	Radial Lead
Size / Dimension:	2.498" L x 0.500" W (63.45mm x 12.70mm)
Height - Seated (Max):	0.500" (12.70mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CPR20220R0JE66 is a through-hole resistor manufactured by Panasonic. It is an industrial-grade resistor that is designed for use in demanding industrial and engineering applications such as power management, automotive, and machine control. The resistor is composed of two chips that are joined using epoxy adhesive. The device has a heat-resistant ceramic body that makes it suitable for high-temperature environments. It has a wide resistance range of 0.1Ω to 1000Ω and can handle maximum power of 1W. The device also features a maximum voltage rating of 250V. Other important features include low interwinding leakage current, high surge current capabilities, long-term reliability and low noise. CPR20220R0JE66 has a variety of applications in industries and engineering applications. It can be used as a limiting resistor in power supplies, a current-sensing resistor in motor control applications, as a noise-suppression resistor and also as a load resistor in automotive systems. When it comes to the working principle, the CPR20220R0JE66 is based on Ohm’s law. According to this law, the amount of electrical current that flows through the resistor is directly proportional to the voltage applied across it. This means that, if the applied voltage is increased, then the resistor will draw more current. This principle is the basis for all resistors and is the reason why they are used in the vast majority of electronic applications.In the CPR20220R0JE66, current is limited to the amount of power that can be dissipated within the device. The device has a power rating of 1W, which means it can handle a maximum of 1W of power. The amount of current that can flow through the device depends on the voltage applied across it. If a higher voltage is applied, then more current will flow, but the current will be limited to the point hot the device will reach its maximum power rating.Finally, the device also has surge protection capabilities. It can withstand higher voltages and currents that may occur during switch-off and switch-on operations. This is important for protecting the device from transient voltage disturbances.Overall, the CPR20220R0JE66 is a through-hole resistor that is designed for use in demanding industrial and engineering applications. It has a wide resistance range of 0.1Ω to 1000Ω, a maximum voltage rating of 250V, low interwinding leakage current, high surge current capabilities, long-term reliability, and low noise. It can be used as a limiting resistor in power supplies, a current-sensing resistor in motor control applications, as a noise suppression resistor, and also as a load resistor in automotive systems. Additionally, it also has surge protection capabilities.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description