CPR20800R0JE6630

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors such as the CPR20800R0JE6630 are components used in a wide variety of applications and roles. The key feature of these resistors is that they are used for integrating into a larger electrical system or component. By doing this, they are able to shape electrical current passing through them, in order to match the desired system output. This is achieved by introducing electrical impedance, in order to reduce the current strength and create a more suitable result.

The CPR20800R0JE6630 through-hole resistor is composed of a resistive element surrounded by a ceramic core and ceramic end caps. The resistive element is made up of copper wire, which is deployed in rolls within the core to obtain a certain impedance value. The ceramic core ensures that the resistor looks the same each time it is deployed in an electronic circuit, providing uniformity and reliability for each device. It also helps to dissipate heat in order to maintain peak operating performance. The ceramic end caps help to close off the resistor, protecting it from physical damage or moisture that can otherwise interfere with its operation.

The CPR20800R0JE6630 through-hole resistor is suitable for a variety of applications. It is often used in electronic current-limiting applications, such as power supplies, audio equipment, or personal computing devices. In these cases, the resistor limits the current so that the system is not overwhelmed by too much power. It is also used in applications that require signal conditioning, such as microphone preamplifiers or voltage amplifiers. In both of these cases, the resistor allows a signal of certain strength to pass through it, while other signals are blocked.

In order for the CPR20800R0JE6630 through-hole resistor to accomplish its role, it must be connected to the power source and the circuit board. The resistance value must be correctly chosen so that it produces the desired electrical outcome. This is typically set at a value that will reduce the current strength by a certain percent, such as 10%. The resistor is then deployed on the circuit board, with the positive lead connected to a power source and the negative lead connected to the circuit board. Lastly, the resistor is soldered to the board and the connection is tested to ensure it is properly secured.

In summary, the CPR20800R0JE6630 is a through-hole resistor that is used to shape and control the flow of electric current in numerous applications. The device is comprised of a resistive element surrounded by a ceramic core and end caps, and is connected to the power source and circuit board. The resistance value must be chosen carefully in order for it to produce the desired electrical outcome. Once installed, the resistor helps to limit current strength and condition signals, ensuring that the device is able to produce an optimal result.

The specific data is subject to PDF, and the above content is for reference