CPS041-2N5060-CT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, also known as silicon-controlled rectifiers (SCRs), are a type of power semiconductor device used primarily in switch-mode power supplies and various control circuits. The CPS041-2N5060-CT is a special type of SCR designed for use in high- and medium-power applications including motor drives, soft starters and industrial lighting fixtures.

The CPS041-2N5060-CT is a unidirectional thyristor with an anode-cathode voltage drop of 2V, a maximum non-repetitive current of 100A, and a turn-off time of 1µS. It can be used for single-phase, full-wave and half-wave rectified circuits. It has a very low forward threshold voltage and is able to endure high Junction temperatures.

The working principle of a thyristor is based on the fact that a current flows through it in one direction only, once the forward current exceeds a certain threshold, known as the ‘latching current’. After the latching current is exceeded the thyristor will remain in the ‘on-state’ until the current is reduced to a value below the ‘holding current’. When this happens the thyristor will enter the ‘off-state’. The amount of current that must be applied to the thyristor to enter the ‘on-state’ will depend on the type of thyristor being used.

The CPS041-2N5060-CT is designed to be used in devices such as soft starters, motor drives and industrial lighting fixtures. The use of the thyristor in these types of applications is typically for the purpose of controlling the current in the circuit. In a motor drive, for example, the thyristor can be used to control the speed of the motor or to provide adjustable start/stop control. In an industrial lighting fixture, it can be used to provide adjustable light output.

The thyristor can also be used in circuits that are designed to protect the device from excessive current or voltage. This can be done by detecting the over-current or over-voltage condition and then turning the thyristor off using a timer or other type of control. This prevents the load from being damaged due to the excessive current or voltage.

Thyristors can also be used in other applications such as DC-AC converters, power controllers, and power regulators. In these applications, the thyristor can be used to control the voltage or current or to provide a switching function. In a DC-AC converter, for example, the thyristor can be used to convert the DC input to AC output.

The use of thyristors in electronic devices has increased greatly over the years, as they are well suited for controlling high-power circuits. The CPS041-2N5060-CT is a highly reliable and efficient type of thyristor that can be used in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference