CR02AM-8#F00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are a type of semiconductor switch which has the capability to control current. Thyristors are divided into two categories, namely, SCRs (silicon-controlled rectifiers) and Triacs (triode for alternating current).

CR02AM-8#F00 belongs to the SCR (silicon controlled rectifier) category. Basically, SCRs are switches that can remain “closed” even after the initiating signal has been removed. This means that the SCR will remain “on” even when the gate current has been switched off. Generally, SCRs are available in either 4-pin or 6-pin packages.

CR02AM-8#F00 is a 4-pin SCR. One of its pins is the gate which is used to control the current. When the gate current is turned on, the SCR turn on and allows current to flow through the device. The other three pins are the Anode, Cathode and Emitter. The Anode and Cathode pins allow current to flow through the device, whilst the Emitter pin drains off the excess charge and returns the device to its off-state after the gate current has been turned off.

Broadly speaking, the applications of CR02AM-8#F00 are in the motor control domain. Specifically, the SCR is used to switch a motor on and off. Apart from switching motors on and off, the CR02AM-8#F00 can also be used in industrial applications that require the control of current, voltage, and/or power. The SCR can also be used in circuits where control of power consumption is required to reduce energy consumption. Furthermore, the SCR can be used in industrial automation applications where the power supply needs to be switched on and off depending upon certain conditions or environmental conditions are met.

The working principle of the CR02AM-8#F00 is quite simple. When the gate current is turned on, the SCR turns on and allows the current to flow through the device. Consequently, depending on the current needs, the devices\' current ratings are selected. Furthermore, the SCR can be used for both AC and DC current depending upon the application requirements. Once the SCR has been triggered, it remains “on” unless the gate current is cut off and the excess charge is drained off through the emitter pin.

In conclusion, CR02AM-8#F00 is a 4-pin SCR (Silicon-controlled rectifier) which is mainly utilized in motor control but can also be used in various industrial applications. The working principle is quite straightforward and involves relatively simple switching of current.

The specific data is subject to PDF, and the above content is for reference