CR4470-10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Current Transducers are electronic components used to measure electric characteristics such as voltage, power, current, etc. There are many types of current transducers, ranging from those used for industrial purposes to those used in private or commercial applications. The most commonly used type of current transducer is the CR4470-10, which is designed to measure alternating current and voltage for industrial applications.

The CR4470-10 is a current transducer specifically designed to measure alternating current in industrial applications. It is based on the Hall-effect principle, which states that when a current passes through a ferromagnetic material, a perpendicular magnetic field is produced in the material. This field can be detected and measured by placing a small probe on the material.

The CR4470-10 is a three-terminal current transducer, meaning that it has three distinct inputs: the primary current input, the secondary voltage input, and the output. The primary current inputs can be varied in order to measure different characteristics of the alternating current. For example, if the primary current is adjusted to measure the phase angle of the alternating current, the measured value will indicate the relative shift in the alternating current’s waveform. The secondary voltage input allows the current transducer to be used in systems that have an existing voltage reference, thus removing the need for additional voltage reference circuitry. The output of the CR4470-10 is a proportional voltage signal which can be used to interface with other electrical components.

The CR4470-10 is a highly accurate device, with a typical accuracy of 0.2%. The device is also highly reliable, with a lifetime of up to 15 years at an ambient temperature of 20°C. The device can also be used in harsh environments due to its temperature coefficient of less than 1%. In addition, the CR4470-10 is designed for easy installation and maintenance, with no external wiring required.

As mentioned, the CR4470-10 is designed to measure alternating current and voltage in industrial applications. It can be used to measure the phase shift between current and voltage in an AC circuit, as well as the line-to-neutral voltage and power in both AC and DC circuits. The CR4470-10 can also be used to detect single-phase and three-phase power supply faults, and it can be used for instrumentation and metering purposes.

The CR4470-10 is a versatile and reliable current transducer. It is designed with high accuracy and a wide operating range, making it suitable for a variety of industrial applications. In addition, its ease of installation and maintenance make it an ideal choice for industrial applications.

The specific data is subject to PDF, and the above content is for reference