CR4550-250

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CR4550-250 monitor is a current/voltage transducer that is intended to measure the current and voltage parameters of a given system. This monitor is designed with a protection barrier to prevent overcurrents and overvoltages, as well as a separate ground connection to protect against ground potential transients. The transducer has a built-in amplifier system that enables the user to use either current or voltage sets for sensing and is capable of accurately measuring within a wide range of currents and voltages.

The CR4550-250 monitor utilizes a four-wire connection to measure the current and voltage parameters of the monitored system. The two wires connected to the transducer\'s power source provide the current for the transducer\'s operation. These current leads will be connected to the power lines in the monitored system. The other two wires will be connected to the ground line of the monitored system for establishing a ground reference and to the output terminal of the transducer.

The transducer is made up of two main parts, the amplifier circuit and the sensing element. The amplifier circuit is responsible for converting the signal into a voltage which can be monitored. The sensing element is a resistor or a coil that will react to the change in current or voltage. When the current or voltage changes, the transducer will sense it and will provide an output voltage to the monitoring system. The output voltage is proportional to the current or voltage of the monitored system.

The CR4550-250 monitor is designed for applications such as monitoring power supplies, measuring resistances in electrical circuits, and measuring circuit protection devices. It is also used in applications where it is necessary to measure current, voltage, or both. Because of its wide dynamic range, the CR4550-250 monitor can accurately measure signals ranging from very low currents to very high currents. In addition, the multiplexing capabilities of the transducer allows for the monitoring of several current or voltage parameters simultaneously.

The CR4550-250 monitor has several advantages over other current and voltage monitors. For one, it is a four-wire system, which eliminates the need for any additional wiring. Secondly, the multiplexing capabilities of the transducer allow for the monitoring of several parameters at once. Finally, the amplifier system allows for accurate measurements within a wide range of currents and voltages.

In summary, the CR4550-250 monitor is a current/voltage transducer that is designed for measuring current and voltage parameters of monitored systems. The transducer utilizes a four-wire connection for measuring the current and voltage parameters and contains an amplifier circuit and a sensing element. The transducer has several advantages over other current and voltage monitors, including its multiplexing capabilities and its wide dynamic range.

The specific data is subject to PDF, and the above content is for reference