Allicdata Part #: | 582-1136-ND |
Manufacturer Part#: |
CRD485-232 |
Price: | $ 23.51 |
Product Category: | Sensors, Transducers |
Manufacturer: | CR Magnetics Inc. |
Short Description: | CONVERTER ACCESSORY |
More Detail: | N/A |
DataSheet: | CRD485-232 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 21.37590 |
Series: | -- |
Part Status: | Active |
Accessory Type: | Converter |
For Use With/Related Products: | Tranducers |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
CRD485-232 industrial products are a type of communication data link which is widely used in connection between systems, networks, computers and other terminals. It is an open source and has built-in communication security protocols and protocols. This makes it suitable for industrial applications where security, reliability and flexibility are key design considerations.
CRD485-232 communication refers to the process of transferring information from one device to another through a two-way communications system. The system is formed through the installation of a sender, a receiver, and a combination of cables, connectors, and interface hardware that allow the communication to take place. The communication is typically done via an asynchronous serial communication scheme (greater than 9600 bps/sec) and is fully supported by all kinds of serial ports including RS-232, RS-485, and USB.
CRD485-232 is a widely used industrial protocol due to its simple setup and implementation. It is used for a variety of applications, but most commonly for communications over short distances. It supports up to 127 devices which are connectable simultaneously and is accessible via the serial port of PCs, controllers, data acquisition devices, and PLCs. It has low latency which makes it suitable for monitoring and control applications.
The working principle of the CRD485-232 Industrial products is as follows. The data link is an asynchronous communication system that uses two wires to signal data between sender and receiver devices. The two-wire system is referred to as "half-duplex" and requires the use of two pins, with one carrying data one way and the other carrying data in the opposite direction. The wires are connected to each device in a "loop" configuration and data is sent from one device to the next in sequence.
Once the link is established, the sender device sends data which is then passed along to the next device in the sequence. Each receiving device then processes the data, interpreting it as an instruction from the sender to perform an action. It is up to the receiving device to interpret the data and either execute the command or ignore it. This is an efficient way to control multiple devices in the same system.
CRD485-232 Industrial products are extremely useful in a variety of industrial applications. It can be used to transfer data over short distances in industrial environments, enabling quick and efficient communication between devices. It is ideal for use in machine to machine communication as well as in the control of automated processes. In addition, it is also suitable for digital communications over longer distances, enabling the integration of systems within the manufacturing industry.
CRD485-232 Industrial products offer great reliability and a secure connection. Its two wire configuration ensures a robust and reliable connection, and it has built-in security protocols which ensure data sent over the link is only accessible and interpreted by the receiving device. It is also a flexible and configurable technology, as it is compatible with a range of serial ports and can be used in different systems and networks.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
CRD4110-25 | CR Magnetics... | 172.01 $ | 1000 | SENSOR CURRENT XFMR 25A A... |
CRD4110-15 | CR Magnetics... | 172.01 $ | 1000 | SENSOR CURRENT XFMR 15A A... |
CRD4110-5 | CR Magnetics... | 172.01 $ | 1000 | SENSOR CURRENT XFMR 5A AC... |
CRD4110-1 | CR Magnetics... | 172.01 $ | 1000 | SENSOR CURRENT XFMR 1A AC... |
CRD4150-5 | CR Magnetics... | 220.91 $ | 1000 | SENSOR CURRENT XFMR 5A AC... |
CRD4150-1 | CR Magnetics... | 220.91 $ | 1000 | SENSOR CURRENT XFMR 1A AC... |
CRD4150-15 | CR Magnetics... | 220.91 $ | 1000 | SENSOR CURRENT XFMR 15A A... |
CRD4150-25 | CR Magnetics... | 220.91 $ | 1000 | SENSOR CURRENT XFMR 25A A... |
CRD4170-1 | CR Magnetics... | 293.51 $ | 1000 | SENSOR CURRENT XFMR 1A AC... |
CRD4170-15 | CR Magnetics... | 293.51 $ | 1000 | SENSOR CURRENT XFMR 15A A... |
CRD4170-25 | CR Magnetics... | 293.51 $ | 1000 | SENSOR CURRENT XFMR 25A A... |
CRD4170-5 | CR Magnetics... | 293.51 $ | 1000 | SENSOR CURRENT XFMR 5A AC... |
CRD485-232 | CR Magnetics... | 23.51 $ | 1000 | CONVERTER ACCESSORY |
CRD4510-300 | CR Magnetics... | 172.01 $ | 1000 | TRANSDCR VLT AC RS485 0-3... |
CRD4510-150 | CR Magnetics... | 172.01 $ | 1000 | TRANSDCR VLT AC RS485 0-1... |
CRD4550-150 | CR Magnetics... | 220.91 $ | 1000 | TRANSDCR VLT AC RS485 0-1... |
CRD4550-300 | CR Magnetics... | 220.91 $ | 1000 | TRANSDCR VLT AC RS485 0-3... |
CRD4570-150 | CR Magnetics... | 293.51 $ | 1000 | TRANSDCR VLT AC RS485 0-1... |
CRD4570-300 | CR Magnetics... | 293.51 $ | 1000 | TRANSDCR VLT AC RS485 0-3... |
CRD48L10-4IN4OUT | Cirrus Logic... | 306.6 $ | 3 | EVAL BRD CHAS REF BOARDCS... |
CRD48L11 | Cirrus Logic... | 546.0 $ | 12 | EVAL REFERENCE BOARD CS48... |
CRD4525-Q1 | Cirrus Logic... | 528.36 $ | 5 | REFERENCE BOARD FOR CS452... |
CRD44600-PH-FB | Cirrus Logic... | 528.44 $ | 1 | EVAL BOARD FOR CS44600CS4... |
CRD4412A | Cirrus Logic... | 0.0 $ | 1000 | REFERENCE DESIGN FOR CS44... |
CRD42L52 | Cirrus Logic... | 265.44 $ | 1 | REFERENCE DESIGN FOR CS42... |
CRD48DV2-USB | Cirrus Logic... | 175.0 $ | 1000 | EVAL BD 2CH 32BIT FF AUDI... |
CRD42L51 | Cirrus Logic... | 196.88 $ | 1000 | REF BOARD LV STEREO CODEC... |
CRD49834 | Cirrus Logic... | 235.2 $ | 1000 | BOARD EVAL FOR CS49834CS4... |
CRD497024-DC53 | Cirrus Logic... | 294.0 $ | 1000 | EVAL BOARD DUAL DSPEvalua... |
CRD42528 | Cirrus Logic... | 453.6 $ | 1000 | REF DESIGN FOR CS42528 CS... |
CRD4210 | Cirrus Logic... | 0.0 $ | 1000 | REFERENCE DESIGN FOR CS42... |
FIBER REFLECT 1.25 M4 2M
MS46 WELD SHIELD 785MM
PANEL MOUNT ASSEMBLY HARDWARE
8CH CONN I/O EXTENSION UNIT
FRONT PROTECT COVER FOR SF4A
CABLE SOCKET 5-POLE M12 STRAIGHT