CRSH2-2 TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A CRSH2-2 TR is a type of diode that is used to rectify an alternating current (AC) input into a direct current (DC) output. The CRSH2-2 TR is a single device that contains two anodes and two cathodes, which are connected in anti-parallel arrangements to form a bridge rectifier. This rectifier is commonly found in power converters, power supplies, AC motor drives, and other circuits that require DC output for its operation.

An alternating current input will result in an alternating current output after passing through the bridge rectifier. The output from the bridge is then further processed by a filter circuit in order to convert the alternating current into a direct current output. The input of the filter can either be the rectified waveform output from the bridge rectifier or, if the filter is designed for a higher voltage, the output of the bridge can be stepped up to the desired filter input voltage.

The CRSH2-2 TR is constructed of four discrete components. On each side of the device, two back-to-back rectifier diodes are mounted. Each rectifier is composed of two semiconductor slabs, one anode and one cathode, that are connected in anti-parallel. This type of diode arrangement allows only half-wave rectification, allowing the current flow to move only in the direction of either the anode or the cathode.

The CRSH2-2 TR also includes two current sensing resistors that are used to sense the current flow through the bridge. These two resistors, which can have different values, act as a load and help to ensure that the output voltage from the bridge is constant and consistent.

When the input to the CRSH2-2 TR alternates between positive and negative, the rectifier diodes allow the current flow to alternate between the anode and the cathode, allowing the current to flow in a single direction. This rectified signal is then further processed through a filter circuit to convert it into a direct current signal. The filter circuitry allows any harmonics and spikes to be filtered out, resulting in a more consistent, stable output voltage.

The CRSH2-2 TR is used in a variety of applications, such as power converters and power supplies. The device allows for efficient power conversion and is commonly used in applications that require a reliable DC output voltage. Additionally, the device is also used in AC motor drives, for providing a DC voltage for the drive motor.

The CRSH2-2 TR is an efficient, reliable device that is used for converting an AC input into a DC output. The device utilizes four discrete components including two rectifier diodes and two current sensing resistors to rectify and filter the input current into a stable DC output. The device is used in a variety of applications such as power supplies, power converters, and AC motor drives, allowing it to be leveraged in a number of different electronics designs.

The specific data is subject to PDF, and the above content is for reference