CSA2D-E3/I

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CSA2D-E3/I is a type of single rectifier diode. It can be used to rectify AC currents into DC currents typically at frequencies from 50Hz to 400Hz. It is most commonly used for power conversion applications such as AC-DC and DC-AC power supplies, motor control circuits, motor drives, and motor overcurrent protection. It has an average forward current rating of 2A, a peak reverse voltage rating of 20V, and a breakdown voltage rating of 10.5V.

The CSA2D-E3/I is a fast recovery type diode, meaning that it is capable of faster reverse recovery time than other types of diodes. This is important for applications that require high switching speeds, such as inverters and speed controllers. It also features low levels of capacitive losses, making it better suited for high frequency applications. Additionally, it features low leakage current and a low junction capacitance.

The most common application for the CSA2D-E3/I is AC-DC and DC-AC power conversion. It is often used to rectify an AC input voltage into a DC output voltage. The diode acts as a rectifier, which means that it only allows current to flow in one direction. This allows the circuit to provide a positive DC voltage when an AC voltage is applied. The CSA2D-E3/I can also be used to convert a DC input voltage into an AC output voltage, such as in AC servo motors or other motor drive applications.

The CSA2D-E3/I can also be used in motor overcurrent protection applications. In this application, the diode is connected in parallel with the motor and the power supply. When the motor draws too much current, the diode will start to conduct and the excess current will be diverted away from the motor. This prevents the motor from being damaged due to an overcurrent condition.

The working principle of the CSA2D-E3/I diode is fairly simple. It relies on the fact that current can only flow in one direction through the device. When a positive voltage is applied to the anode and a negative voltage is applied to the cathode, current will flow from the anode to the cathode. When the voltage is reversed so that the anode and cathode are both at a negative potential, current will not flow and the diode will not conduct.

In summary, the CSA2D-E3/I is a fast recovery single rectifier diode. It is most commonly used for AC-DC and DC-AC power conversion applications as well as motor overcurrent protection. It features low levels of capacitive losses, low leakage current, and a low junction capacitance, making it well-suited for high frequency applications. Its working principle is based on the fact that current can only flow in one direction through the device.

The specific data is subject to PDF, and the above content is for reference