CSE2425

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are devices that utilize electronics to control an electrical circuit. The CSE2425 is a high-power solid state relay (SSR) that operates in an SPST (single-pole, single-throw) configuration. This type of SSR has a switching voltage of 20V to 40V, a switching current of 24A, and a maximum load of 2425 Watts. It is designed to allow the switching of AC and DC loads up to 2425 watts.

The CSE2425 SSR is composed of two main components: a control circuit and a power circuit. The control circuit consists of MOSFETs, opto-isolators, capacitors, resistors, and diodes. The power circuit is composed of solid-state MOSFETs, inductors, and capacitors. These components are positioned on a printed circuit board (PCB).

The working principle of the CSE2425 is based on the solid-state construction and the power MOSFETs. It is based on the switching action of the optical isolators, which are triggered by a low-voltage control signal. This control signal is generated by the control circuit components, and is used to activate the power MOSFETs. When the control signal is applied, the power MOSFETs turn on and off, causing the current to flow or stop. The capacitors in the control circuit act as a filter and protect the control circuit from the high voltages and currents that are present in the power circuit.

The CSE2425 has multiple applications. It can be used to switch heavy loads such as motors, lamps, and solenoids. It is particularly useful in high-power control systems, as it can switch large amounts of power in a short amount of time. It is also useful in automated systems due to its high switching speed and low power consumption. In addition, it is often used in applications where isolation between the control circuit and the power circuit is necessary.

In conclusion, the CSE2425 is a high-power solid state relay that is suitable for a wide variety of applications. It utilizes a low-voltage control signal to switch AC and DC loads up to 2425 watts. It is an efficient and reliable way to control power in automated systems and high-power applications. By utilizing the components of its control and power circuits, the CSE2425 is able to switch a large amount of power in a short amount of time, making it ideal for many industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference