CSM-015A-LF

Series:	CSM
Part Status:	Active
Pressure Type:	Absolute
Operating Pressure:	15 PSI (103.42 kPa)
Output Type:	Wheatstone Bridge
Output:	0 mV ~ 66 mV (3V)
Accuracy:	±0.5%
Voltage - Supply:	6V
Port Size:	--
Port Style:	No Port
Features:	Temperature Compensated
Termination Style:	Surface Mount
Maximum Pressure:	30 PSI (206.84 kPa)
Operating Temperature:	-25°C ~ 85°C
Package / Case:	8-CSMD, No Lead
Supplier Device Package:	8-CSMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers

CSM-015A-LF, a kind of pressure transducer, is a sturdy and reliable electronic device which converts the detected pressure into an electrical signal. It is designed to fulfill a wide range of pressure and temperature accuracy requirement. Whether it is used in medical, industrial, or aerospace field, CSM-015A-LF provides precise pressure data measurements.

Application Field

The CSM-015A-LF transducer offers an unequalled combination of features and accuracy, making it ideal for medical, scientific, and industrial applications. Its compact size makes it a suitable choice for small volume and tight fit applications which require high accuracy measurement.

• Medical applications: cardiac and pulmonary function monitoring, fetal monitoring, clinical and pre-clinical research;
• Industrial applications: water or oil pressure measurement, process control;
• Aerospace applications: aircraft engine and flight control system.

Working Principle

The working mechanism of CSM-015A-LF is based on the piezoresistive effect, which states that when a pressure is applied onto a conductive material, the resistance in the material will change proportionally. This means that when a pressure is applied onto the transducer, the resistance of the transducer will vary accordingly and the change is detected by a bridge sensor circuit. The bridge sensor circuit is common in controlling pressure measurement devices, and can measure both large and low dynamic pressure range. This is based on the Wheatstone bridge principle, in which four resistors are connected in a plus-minus shape, two long ones at the top and two short ones at the bottom. When the pressure is detected by the pressure transducer, the resistance of the resistor undergo a change and so does the voltage output. This voltage output is the output of the bridge sensor circuit. The output voltage of the bridge sensor circuit will then enter an amplifier circuit and be converted into useful form such as analog or digital. This analog or digital form is the output of the CSM-015A-LF pressure transducer.

Conclusion

The CSM-015A-LF pressure transducer is a reliable and convenient device which can be used for medical, industrial, and aerospace applications. It works based on the piezoresistive effect to convert an applied pressure into an electrical signal, in which a bridge sensor circuit is used to measure the voltage output and the signal is further amplified in an amplifier circuit. This is how CSM-015A-LF pressure transducer works and how it is used in various applications.

The specific data is subject to PDF, and the above content is for reference