CSPEMI202FCTAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are components used for limiting the interference of environmental electromagnetic radiation (EMI) and radio frequency interference (RFI). They are also used to reduce EMI in electronic systems. The purpose of using filters is to protect electronic equipment from the effects of signal interference in the environment. The CSPEMI202FCTAG is an EMI/RFI filter specifically designed for use in consumer applications.

The CSPEMI202FCTAG utilizes an LC filter network to provide effective EMI/RFI reduction. The LC filter consists of inductors and capacitors, connected in series or parallel for specific frequencies. The frequencies that the filter can attenuate are dependent on the inductors and capacitors used, as well as the type of filter. The CSPEMI202FCTAG has a 2-pole LC filter and is designed to attenuate signal frequencies from 350 kHz to 1000 MHz.

The working principle of the CSPEMI202FCTAG is simple and straightforward. Incoming EMI/RFI signals pass through a series of capacitors and inductors, which reduce the amplitude of the interfering radiation. The filtered signal is then output at a lower level of amplitude, which results in less interference for the electronic equipment. For optimal results, the CSPEMI202FCTAG should be installed in an optimized layout, in order to maximize EMI/RFI attenuation.

The CSPEMI202FCTAG can be used in a variety of applications ranging from consumer electronics to industrial automation. It is commonly used in cell phones, computers, and medical devices. It is well-suited for industrial and medical applications, as it can be used in high power, low current environments. The CSPEMI202FCTAG is also suitable for automotive and telecommunications applications, due to its low power requirements.

In summary, the CSPEMI202FCTAG is an EMI/RFI filter specifically designed for use in consumer applications. It utilizes an LC filter network to provide effective EMI/RFI reduction across a wide range of frequencies, from 350 kHz to 1000 MHz. The working principle is simple and straightforward, with incoming signals passing through capacitors and inductors to reduce the amplitude of the interfering radiation. The CSPEMI202FCTAG can be used in a variety of applications, ranging from consumer electronics to industrial automation, and is well suited for high power, low current environments such as automotive and telecommunications applications.

The specific data is subject to PDF, and the above content is for reference