CT9EW501

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers

A trimmer potentiometer, also known as a trimmer pot for short, is an adjustable voltage divider device that provides an adjustable resistance or impedance for use in various electronic circuits. It is a type of potentiometer which provides a variable output voltage or current in response to an input voltage or current. Trimmer potentiometers are commonly used to adjust the frequency, gain, power, impedance, and other parameters in electronic circuits.

The CT9EW501 Trimmer Potentiometer is a rotating metal-oxide layered ceramic device that can be used in a variety of applications. It has a wide range of voltage ratings and is offered in several different packages, from through-hole to surface-mount. It has an adjustable resistance of up to 500 ohms and an adjustable voltage of up to 50 volts.

The CT9EW501 is specifically designed for use in applications such as radio receivers, amplifiers, and other electronic circuits that require an adjustable voltage divider. It is also used in motorized electrical systems, such as variable-speed fan motors and car alarms, as well as in audio and video systems. The CT9EW501 has an extremely low temperature coefficient, which enables it to be used in high-frequency and high-power circuits.

Working Principle

The working principle behind the CT9EW501 Trimmer Potentiometer is relatively simple. A rotating metal-oxide layer is mounted onto a base. The base is then connected to two separate pins, which are connected to a voltage source and the Potentiometer\'s output. As the metal-oxide layer is rotated by an actuator, the resistance of the Potentiometer changes. The voltage source provides the voltage that is then switched across the Potentiometer, creating a varying voltage output, depending on the resistance value of the Potentiometer.

The resistance of the Potentiometer is determined by the physical size of the metal-oxide layer. The larger the layer, the higher the resistance; the smaller the layer, the lower the resistance. The range of adjustable voltage and resistance for the CT9EW501 is determined by the size of the Potentiometer and the type of voltage source used. It is important to note, however, that the maximum range of voltage and resistance is determined by the Potentiometer\'s rating.

The CT9EW501 is an ideal device for applications requiring adjustable or variable voltage, such as when driving an LED or powering a motor. It can also be used in a variety of circuit designs in order to adjust the gain, frequency, or impedance of an amplifier. In addition, this Potentiometer is very reliable and is designed to last for many years without fail.

The specific data is subject to PDF, and the above content is for reference