CTX250-2-52LP-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are passive electronic components components used in a variety of products. They are used to filter, store, and transfer electrical energy. The application field and working principle of CTX250-2-52LP-R are discussed in this article.

CTX250-2-52LP-R is a fixed inductor with a size of 250" x 250". It is a low-profile and has a low DCR of 0.5Ω and a current rating of 15A. It is suitable for a wide range of applications, including power supplies, medical devices, automotive, industrial, and consumer electronics.

The working principle of CTX250-2-52LP-R is based on the principle of Faraday’s Law. This law states that if a closed conductor path is subject to a change in the magnetic field, an electromotive force will be induced in the conductor. This force is proportional to the rate of change of the magnetic field.

The inductor works by converting the applied current through the copper wire and reacting it with a magnetic field. The magnetic field caused by the current induces a voltage in the inductor which opposes the applied current. This voltage is proportional to the current (Ohm’s Law) and is used to limit the current in an electrical circuit.

The main use of CTX250-2-52LP-R is to serve as a component in switching power supplies. The inductor absorbs all the energy used when the switch is closed and stores it. When the switch is opened, the energy is released and sent to the load. This helps to reduce the current spikes that occur when the switch is opened, improving the efficiency of the power supply.

The inductor can also be used in filters to reduce or remove high frequency noise from electronic circuits. By connecting an inductor to the input of an amplifier, a low-pass filter can be created which will allow low frequency signals to pass through while blocking out high frequencies. This helps to reduce the interference caused by high frequency signals.

CTX250-2-52LP-R can also be used in radio frequency applications, such as antenna systems. By connecting an inductor to the antenna, the inductor will react to the changing electrical field and create a magnetic field. This magnetic field is then aligned with the antenna’s electric field and helps to increase the directed transmission of the signal.

In summary, CTX250-2-52LP-R is a low profile, fixed inductor with a low DCR and high current rating. It can be used in a variety of applications, including power supplies, medical devices, automotive, industrial, and consumer electronics. It works on the principle of Faraday’s Law to convert applied current into a magnetic field, inducing a voltage which opposes the applied current, allowing for the current limiting of electrical circuits. Additionally, it can be used for noise filtering and radio frequency applications.

The specific data is subject to PDF, and the above content is for reference