CTX66-19414-R

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode ChokesCommon mode chokes, also known as ferrite beads, are a type of inductive filter used to provide filtering of electromagnetic interference, often referred to as EMI, for applications such as printed circuit boards. Common mode chokes are designed to reduce or eliminate noise in power supply circuits, as well as audio and telecommunication lines.The CTX66-19414-R is a common mode choke designed for use in power supply and telecommunications circuits. It is a radial-leaded, molded-shield, ferrite bead inductor designed to reduce common mode noise in circuits between 10 kHz and 10 MHz. The CTX66-19414-R features a low impedance at high frequency while offering high attenuation at a wide frequency range. It is rated for operating temperatures from -55°C to +125°C.The CTX66-19414-R is suitable for a variety of applications such as filtering of EMI in power supply and communications circuits. It is designed for use in both on-board and off-board applications such as: power supply lines terminating with a printed circuit board, twisted-pair communication cables, switching power supplies, radio frequency applications, differential-mode lines, analog signal and noise reduction, and telecommunication circuits.The CTX66-19414-R works by significantly reducing the amount of common-mode noise present in a given circuit. Common mode noise is any noise or interference that affects both wires of a differential signal. It is created as a result of radio frequency interference (RFI) or electromagnetic noise (EMI) from external sources such as power supply noise, cordless telephones, and other electronic and electrical devices.Common mode chokes such as the CTX66-19414-R work in two ways: by reducing the inductance of the common-mode circuit, and by providing a high impedance path to the source of the EMI. By reducing the inductance of the common-mode signal path, the amount of EMI that is conducted through the circuit is significantly reduced. At the same time, the high-impedance path to the source of the EMI allows the EMI to pass through without interfering with the circuit. The CTX66-19414-R is constructed from a series of ferrites stacked onto an air core base. Each ferrite applies a certain amount of inductance to the circuit, depending on the number of turns. The total inductance can be adjusted by a single turn or by adjusting the number of turns. This allows the CTX66-19414-R to provide efficient filtering for a wide range of frequencies and EMI sources.The CTX66-19414-R is also designed for high efficiency and reliability. It has a high temperature range and is designed with a surge overload current of up to 150% to reduce the risk of circuit failure. Additionally, the CTX66-19414-R is designed for low power loss applications, reducing the amount of heat generated in the circuit.In conclusion, the CTX66-19414-R is a high-performance common mode choke that is ideal for use in power supply and communications circuits. It provides efficient filtering of EMI and noise, and is designed for high efficiency and reliability. By reducing the inductance of the common-mode signal path and providing a high impedance path to the source of the EMI, the CTX66-19414-R is able to reduce electromagnetic interference and ensure reliable performance in the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description