CUB7CCS0

Input Type:	No Voltage, Voltage
Weight:	0.126 lb (57.15g)
Operating Temperature:	0°C ~ 50°C
Ingress Protection:	IP66 - Dust Tight, Water Resistant
Termination Style:	Wire Leads
Mounting Type:	Panel Mount
Panel Cutout Dimensions:	Rectangular - 45.00mm x 22.20mm
Reset:	External, Front Panel
Voltage - Supply:	Battery, 3.6VDC
Output Type:	--
Series:	CUB7
Display Characters - Height:	0.350" (8.90mm)
Display Type:	LCD - Black Characters
Number of Characters Per Row:	8
Time Format:	--
Count Rate:	30Hz, 50Hz, 5kHz, 10kHz
Operating Mode:	Up
Type:	Totalizer
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Panel Meters - Counters, Hour Meters

Panel meters are used in a wide variety of applications as they’re typically used to measure and display electrical values such as voltage, current, and frequency. Counters and hour meters are two types of panel meters typically used to monitor and record the amount of time a piece of equipment has been operated. The CUB7CCS0 counter/hour meter is a multi-functional device that can work as either or both.

Features of the CUB7CCS0

The CUB7CCS0 is a 7-digit, industrial-grade counter/hour meter that offers a wide range of features. It features a six-digit counter with one input, a 10-digit LCD, a seven-digit accumulator, and a seven-digit hour meter. It also includes a UV LCD backlight, a large operator display, and a built-in output relay.

Proper Use

The CUB7CCS0 is designed to properly and accurately monitor counts and hours. It’s important to use the device in the recommended manner and to check the accuracy of readings regularly. The device should be installed in an area where it’s not exposed to direct sunlight or extreme temperatures. It should also be mounted securely in place using the recommended mounting bracket and clamps.

Operation

The CUB7CCS0 counter/hour meter operates in two modes: counter mode and hour meter mode. In counter mode, the counter is reset and then counts up when current flows through the input. The count is then displayed on the LCD. In hour meter mode, the timer begins to count up from zero when the device’s power is turned on. It’s important to note that the hour meter will not count down in this mode.

Input Signal

The CUB7CCS0 can be used with either a contact or open-collector input. A contact input is an electrical signal that is sent from a contact contactor, switch, or solenoid. An open-collector input is an electrical signal that is sent from a transistor, relay, or opto-coupler. It’s important to note that the input signal must be within the device’s specified range for it to accurately record the count or hour.

Output Relay

The CUB7CCS0 features a built-in output relay which can be used to control the device’s downstream equipment. The output relay can be programmed to activate after a certain amount of time or count. Additionally, the output relay can be triggered immediately using the device’s push-button switch or external signal.

Conclusion

The CUB7CCS0 counter/hour meter is a multi-functional device that can be used to count, measure time, and control downstream equipment. It features a seven-digit LCD, a six-digit counter, a ten-digit LCD, and a seven-digit accumulator. Additionally, the device can be used with either an open-collector or contact input signal and includes a built-in output relay. It’s important to use the device as directed and to check the accuracy of readings regularly.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description