CW01011R00JE733

Through Hole Resistors

A through hole resistor is a type of resistor that is fixed in place via a hole in the printed circuit board. They are usually made from a conductive material and typically have two wires or pins that are soldered to the board. The resistance of the resistor is determined by its size, shape and material type. There are many different types of through hole resistors, including carbon Composite resistors, metal-film resistors, thin-film resistors and wire-wound resistors.

The CW01011R00JE733 through hole resistor is a high-precision, high-stability resistor with low thermal coefficient and low thermal displacement. It has a resistance value of 0.01 ohm and is encapsulated in a metal film. This resistor is ideal for automotive, industrial and consumer electronics applications. Its size is 5.08mm X 3.2mm, making it ideal for applications with space constraints.

CW01011R00JE733 Application Fields and Working Principle

The CW01011R00JE733 through hole resistor is primarily used in consumer electronics, automotive and industrial applications. For example, it can be used for the voltage and current regulation in electronic circuits. In addition, it can be used as a shunt resistor, in which it is placed in parallel with the circuit so that it absorbs excess current, thus preventing damage to other components. Another application of the CW01011R00JE733 through hole resistor is as a noise reduction filter, where it is placed in the input of a circuit to reduce any unwanted high-frequency noise that may disturb the circuit’s operation.

The working principle of the CW01011R00JE733 through hole resistor is simple and straightforward. When a current passes through the resistor, it dissipates some of the energy in the form of heat. The amount of energy dissipated is determined by the resistance value of the resistor. The resistor opposes the current flow and dissipates some of the energy in the form of heat, thus limiting the amount of current that passes through.

Conclusion

The CW01011R00JE733 through hole resistor is an ideal choice for applications requiring precision, high stability, low thermal coefficient and low thermal displacement. Its size and resistance value make it well-suited for consumer electronics, automotive and industrial applications. Its ability to limit current flow makes it an invaluable component in the construction of various circuits and devices. Additionally, its use as a shunt resistor and noise reduction filter ensure its status as a valuable component in any printed circuit board.